|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-02-2013, 12:41 PM
|
#1 |
|
Not Yet Wild
 Join Date: Jul 2013
Location: Clinton Township, MI
Posts: 27
|
Rocker panel trim removal
I know it sounds like a stupid question but. Anyone have any tricks to removing the rocker panel trim. When I tried to unscrew the screws there just spinning. I'm trying to remove the floor mat to check the ITS.
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-02-2013, 02:27 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 47
|
Re: Rocker panel trim removal
There's a nut on the bottom side you will have to hold.
|
|
|
|
|
08-02-2013, 02:48 PM
|
#3 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Rocker panel trim removal
You need to hold the nuts with a socket while turning the bolts.
|
|
|
|
|
08-02-2013, 03:40 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2013
Location: Clinton Township, MI
Posts: 27
|
Re: Rocker panel trim removal
Doh! Thanks
|
|
|
|
|
08-02-2013, 03:50 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Rocker panel trim removal
These are small carriage bolts the fact that they spin lead me to believe they are rusted. Rusted enough that the nuts may not come off easily. IF the Philips head strips out use a small die - grinder to cut a slot in the bolt head to fit a large screw driver in it. I have seen them so bad you had to grind & cut em off.
|
|
|
|
|
08-02-2013, 04:22 PM
|
#6 |
|
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Rocker panel trim removal
ONLY reason I haven't added aftermarket rockers... could NEVER get my OEM's off!!
 Good luck - keep us posted!  |
|
|
|
|
08-02-2013, 04:44 PM
|
#7 |
|
I Believe !!
Join Date: Mar 2013
Location: Panhandle Florida
Posts: 1,419
|
Re: Rocker panel trim removal
I had to use the ole SAWZALL..
I lubed the news one up good... Also I had a hard time finding the EZGO screw with the big Phillips head and save the spacer... |
|
|
|
|
08-02-2013, 05:33 PM
|
#8 | |
|
Not Yet Wild
Join Date: Jul 2013
Location: Clinton Township, MI
Posts: 27
|
Re: Rocker panel trim removal
Quote:
|
|
|
|
|
|
08-02-2013, 06:14 PM
|
#9 |
|
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,286
|
Re: Rocker panel trim removal
Whatever happens, replace them with stainless hardware.
|
|
|
|
|
08-02-2013, 06:24 PM
|
#10 | |
|
Not Yet Wild
Join Date: Jul 2013
Location: Clinton Township, MI
Posts: 27
|
Re: Rocker panel trim removal
Quote:
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Those silly little spacers under the rocker panel trim.. | Electric EZGO | |||
| Rocker Panel with Fender Flares | Electric EZGO | |||
| Rocker Panel Issues | Gas EZGO | |||
| rocker panel covers for sale | Golf Carts and Parts | |||
| rocker panel covers | Lifted Golf Carts | |||
Linear Mode
