|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-15-2016, 10:16 PM | #11 |
Not Yet Wild
Join Date: Dec 2010
Posts: 24
|
Re: Field coil stud repair
Ok guys. Repair was simple. Tigged it with some brazing rod and the cart runs.
Now the next question. It was given to be without any micro switches and solenoid was excited by the ignition switch. So now I'm wondering about hooking up up the jumper cable from the solenoid to the #2 wiper contact. I know that we will need a micro switch on the wiper board wired N/C. So I'm wondering can I use the ingition switch to ground the solenoid and the mirco switch to excite the solenoid ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Field coil rewind | Extreme DC! | |||
motor stud repair ? | Electric EZGO | |||
clutch stud repair | Gas Harley Davidson | |||
broke the stud off of the field windings | Electric EZGO | |||
3 1/2 hp. field coil question | Electric EZGO |