|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-01-2011, 03:29 PM | #1 |
Not Yet Wild
Join Date: Feb 2011
Posts: 33
|
rubber spline bumper installation! which direction??????
I'm installing a new bumper ( mine didnt have one ) and am assuming the flat part goes into the coupler and the hollow part with the beveled end faces the input shaft . Am i there or way off??? thanks all for your help thru this project . Soon pics!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-01-2011, 03:44 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,284
|
Re: rubber spline bumper installation! which direction??????
This bumper is ready to slide directly into the motor shaft in the correct orientation. Coat everything with antiseize before assembly. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
rubber spline bumper@motor.necessary? | Electric EZGO | |||
rubber bumper between motor and input shaft needed? | Electric EZGO | |||
Motor spline rubber bumper | Electric EZGO | |||
Spline engagement | Electric EZGO | |||
What Spline Motor In My 83 CC | Electric Club Car |