lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-16-2011, 12:30 AM   #1
garys08slt
Not Yet Wild
 
Join Date: Jun 2010
Location: Pasadena , Maryland
Posts: 24
Default Jakes Spindel kit wheel offset??

How much wider apart are the wheels offset on a 6 inch jakes spindel kit? Just wondering, I want to order some wheel spacers for the rear wheels so it matches. I would measure it myself but the cart is not here right now." Its 600 miles away at campground"
garys08slt is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-19-2011, 11:59 AM   #2
villajoe
Getting Wild
 
villajoe's Avatar
E-Z-GO
 
Join Date: Jul 2008
Location: TAMPA, FL
Posts: 131
Default Re: Jakes Spindel kit wheel offset??

about 2 inches. i put 2" spacers on the back of my cart and they're about even with the front now.
villajoe is offline   Reply With Quote
Old 04-19-2011, 05:36 PM   #3
COURTESYCART
Gone Wild
 
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
Default Re: Jakes Spindel kit wheel offset??

I would say 2" also or you can get diff offset wheels. I have seen that before.
COURTESYCART is offline   Reply With Quote
Old 04-19-2011, 07:44 PM   #4
Spawn
Gone Wild
 
Spawn's Avatar
E-Z-GO
 
Join Date: Dec 2010
Location: Jax FL
Posts: 598
Default Re: Jakes Spindel kit wheel offset??

Will a 8" stock rim fit on the Spindle? Just wondering since I was looking at a little bigger tire for the stock wheel and down the road go with bigger rims and tires later. I have 2 20x10x8 for the back in the Tera Trac and was looking to do the same on the front with the 6 inch Jakes lift.
Spawn is offline   Reply With Quote
Old 04-19-2011, 08:45 PM   #5
villajoe
Getting Wild
 
villajoe's Avatar
E-Z-GO
 
Join Date: Jul 2008
Location: TAMPA, FL
Posts: 131
Default Re: Jakes Spindel kit wheel offset??

check out these pics (click the link). looks like 8" rims...pretty tight but might work.

http://www.buggiesgonewild.com/desig...52-06-pds.html
villajoe is offline   Reply With Quote
Old 04-19-2011, 09:13 PM   #6
LostHusker
Just one day at a time
 
LostHusker's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: South TX
Posts: 8,650
Default Re: Jakes Spindel kit wheel offset??

Quote:
Originally Posted by Spawn View Post
Will a 8" stock rim fit on the Spindle? Just wondering since I was looking at a little bigger tire for the stock wheel and down the road go with bigger rims and tires later. I have 2 20x10x8 for the back in the Tera Trac and was looking to do the same on the front with the 6 inch Jakes lift.
The 8" rim will not work with the jake's spindle lift. The rim will rub against the spindle.
LostHusker is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
wheel offset Gas EZGO
Wheel offset? On Road Golf Carts!
Jakes Lift and 3x5 Offset Electric Club Car
jakes kit, g1 and 3x5 offset 8" rims ? Gas Yamaha


All times are GMT -5. The time now is 03:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.