|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-19-2013, 12:46 AM | #11 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: DS front end bushings needed
If I'm reading correct, you need the 2 rubber halfs and the metal sleeve that goes in the middle for each side of the front leaf spring? So 4 rubbers (heh) and 2 metal sleeves? I probably have some laying around from a lift job I did. If you PayPal me the shipping cost you can have them.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2013, 06:27 AM | #12 |
Not Yet Wild
Join Date: Jun 2013
Posts: 4
|
Re: DS front end bushings needed
ok i got it everyone, i wanted a quick fix so i made my own bushings..the ID of the spring was about 7/8 of an inch.. a piece of 3/4 inch copper was a tight fit, but it worked, then 4 simple bronze bearings 1/2 x 3/4 x 1 x 1/2. I did reuse the steel sleeve, although i had to clean it up. this should get me going for a while, i have 1/4 inch of space now between the wheel and the leaf, which was rubbing before...
thanks everyone! |
06-19-2013, 09:53 AM | #13 |
Gone Wild
Join Date: Mar 2009
Location: Raleigh NC & Bracey VA
Posts: 156
|
Re: DS front end bushings needed
Use a BFH. Big **##### Hammer
|
|
|
Similar Threads | ||||
Thread | Forum | |||
front cowl needed | Gas EZGO | |||
Need Front Shock Bushings | Gas EZGO | |||
Front Leaf Spring Bushings | Gas Club Car | |||
Replacing front bushings on '91 CC | Electric Club Car | |||
front cowl needed | Golf Carts and Parts |