EZGO Marathon head light/tail light wiring trouble

[Jeff12345]

I have a 1991 EZGO marathon that I had new batteries replaced in. They did not hook the factory head lights and tail lights back in when I received it back. My understanding is the factory lights are all 12V but I have no idea where to hook up these 4 wires (black, grey, yellow, green). I am trying to follow the diagram below but can't seem to figure it out. Can anyone help? Thanks!

IMG_7246.jpg

IMG_7248.jpg

IMG_7250.jpg

[Jeff12345]

B5FC95A4-66C2-47E0-B484-F9537FD75705.jpg

4D03A07F-1950-47BD-BF02-06AFB689CF47.jpg

[orangeman6]

Jeff, experts will be along soon, but I can give you a couple things. First, you should consider a voltage reducer or separate 12v battery for your accessories. I have a 2001 txt and it came from the factory with head/tail lights. Ezgo got the 12v by tapping 2 of the 6v batteries. This draws those two batteries down unevenly, which is not good for the whole pack.

As far as the wiring goes, on my cart, the green wire was hooked to positive of the 5th battery, then powered the fuse block, which powered the accessories. My black wire was on #6-. That white wire may come from charge port to #1+. HOWEVER, wait for the real help, or confirm on your diagram, before you go hooking stuff up. But, you for sure need to consider the reducer or 12v battery option.

[Jeff12345]

Thanks, anyone have a diagram or pictures?

[Jeff12345]

Still trying to fiqure this out. Anyone have any pictures of the wiring for a Marathon with factory head/tail lights?