Head/Tail Light Bulb

[Winston Ellis]

Does anyone know the factory bulb type for the Club Car DS head/ Tail lights? MY cart is all covered up I`m too lazy to run out there.

[NoleFan4Ever]

If Tahoe sees this he will know for sure. I have too many aftermarket kits added after the fact.

[TahoeDawgZ71]

Headlights - 886 for 50 watts, 889 for 35 watts. I like the 886. Club Car used them from the factory. Most of your cheap Chinese light kits use an 889 and they're not as bright. Both bulbs use the same base so you can use either one.

Tail lights - 1157

[Winston Ellis]

Thanks I appreciate it!


Sent from my iPhone using Tapatalk

[SB77]

Is there any ds options for led bulbs with turn signals in factory holes? Or better... Factory bezels?

[TahoeDawgZ71]

Originally Posted by SB77

Is there any ds options for led bulbs with turn signals in factory holes? Or better... Factory bezels?

Check amazon. LED Bulbs for 886 halogen replacement.

[SB77]

Thanks Tahoe...but the bulbs are way underpowered? Or are new generation led bulbs OK? Also any way to get that turn signal light to function?

[TahoeDawgZ71]

Originally Posted by SB77

Thanks Tahoe...but the bulbs are way underpowered? Or are new generation led bulbs OK? Also any way to get that turn signal light to function?

What do you mean they're underpowered? As for the turn signals, just match the bulb number up with an LED equivalent. I believe they're 194s but I'm not positive.

[SB77]

Originally Posted by TahoeDawgZ71

What do you mean they're underpowered? As for the turn signals, just match the bulb number up with an LED equivalent. I believe they're 194s but I'm not positive.

Hey Tahoe, got some bulbs off amazon and they seem great. I'll be able to tell better when its dark, but seem at least as bright.

What I meant about the blinker is - on my cart, where the bulb holder would go, is just a rubber plug. Do you know what I need as far as (sorry don't know the correct term here) but the piece the wires would plug into, that would hold the bulb, and insert into the lens housing?

[TahoeDawgZ71]

Originally Posted by SB77

Hey Tahoe, got some bulbs off amazon and they seem great. I'll be able to tell better when its dark, but seem at least as bright.

What I meant about the blinker is - on my cart, where the bulb holder would go, is just a rubber plug. Do you know what I need as far as (sorry don't know the correct term here) but the piece the wires would plug into, that would hold the bulb, and insert into the lens housing?

Go to autozone and get some turn signal bulb pigtails. They have them.