11-17-2016, 09:31 AM | #11 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: Rear Shock Advice
It appears to me that they took the stock coil springs, then cut another section of spring to account for the lift, and welded it onto the stock spring. I would bet if you measured the length of the spring you have, it's longer that a "stock" spring and longer by the piece that is welded on.
Just my $0.02 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2016, 10:06 AM | #12 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: Rear Shock Advice
I'm with Dave on this one - that just doesn't look right, LOL ... Also, with most of the support from the springs being contained at the ends with tighter winding, that setup basically reduces the overall support of the springs considerably - likely that's the culprit. Most Marathon lift kits use spring extenders to preserve the intended preload on the springs, where that setup may maintain the lifted ride height it's doing nothing for the ability of the springs to support anything
|
11-17-2016, 11:26 AM | #13 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: Rear Shock Advice
So, we gave you an "answer" but not a "solution". I'm not at all familiar with your type of cart.....but I do know that by doing what they did with the spring extension.....that is in no way going to help stiffen your cart's rear suspension. A longer spring with the same amount of coil....well....stiffness is just going to give you the same or more of a "mushy" ride. So, when you put more weight in the back, the ride will get worse because it will sag even more.
The solution would be to purchase a heavy duty coil spring. Then because of the lift, there needs to be some type of spring "extension"....look at it like a steel cup like "deal" that would rest or "go over" the bottom spring holder (the one on the axle) and go up to where the springs are welded together. The lift kit just raises the cart up. It doesn't give the rear of the cart any additional travel of the rear axle. So, by putting in a HD spring, and a "spacer" that I am speaking of, you will stiffen the rear suspension and still have the same travel distance (up and down) of the rear axle that you have now. Hopefully someone will chime in on if someone makes an after market spacer or kit for your cart. If not, it would seem to me that a local fab shop could make you one in pretty short order. After all....it's not brain surgery. If it were....we would likely all be dead. I hope this helps. |
11-17-2016, 11:31 AM | #14 |
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: Rear Shock Advice
I would try a set of air shocks. You can get the load capacity when you need it and soft ride when you don't. I use them on my big cart, I air them up for 4 passengers and gear and lower the pressure if its just 1 or 2 on the cart.
|
11-18-2016, 09:55 AM | #15 |
Not Yet Wild
Join Date: Apr 2016
Location: Blakely, PA
Posts: 38
|
Re: Rear Shock Advice
Thanks all.....Yeah I'm not really looking for a "Soft Ride" all the time really. I'm not offroading with this thing. Biggest bump I'd be going over is a speed bump. I'm in a camp ground with thing as well. 10mph speed limit too. I'm putting the rear seat on it for my daughter when we bounce around. She's only 5 now but still big enough that she can't fit in the front with us. I'll have to see what I can come up with.
|
11-18-2016, 05:29 PM | #16 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: Rear Shock Advice
I have a stock set of rear springs you could have
But you would have to get the 4inch spacer for the lift Or look at pit stop USA for springs Instead of the lift spacer on my cart I used longer coil springs You would have to measure your length needed and the inside diameter needed for the springs. If I remember right I got 15" long springs at 225 pounds per inch. But I'm not sure and the ones I got were a little on the stiff side |
11-19-2016, 11:29 AM | #17 |
Gone Wild
Join Date: Sep 2012
Posts: 214
|
Re: Rear Shock Advice
|
11-20-2016, 08:02 AM | #18 |
Not Yet Wild
Join Date: Apr 2016
Location: Blakely, PA
Posts: 38
|
Re: Rear Shock Advice
Much appreciated with all the help. I do have to measure but looks like you guys sent me in the right direction.
|
08-05-2019, 09:01 PM | #19 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: Rear Shock Advice
Bump for JAMO
|
08-06-2019, 01:00 PM | #20 |
Not Yet Wild
Join Date: Sep 2015
Location: Stratford, Connecticut
Posts: 18
|
Re: Rear Shock Advice
Thanks Skoal82
|
|
|
Similar Threads | ||||
Thread | Forum | |||
ISO:G22 rear shock | Golf Carts and Parts | |||
G8 Rear SHock | Electric Yamaha | |||
G 14 Rear Shock | Gas Yamaha | |||
Rear shock help | Electric Yamaha | |||
shock advice | Gas Yamaha |