|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-29-2015, 11:15 PM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
G1 crank bearing
Hello everyone, i want to try to find a crank bearing , the one that needs to be pressed on, and im trying to find out were to buy the bearing and a shop to press it in? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2015, 06:09 PM | #2 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 crank bearing
|
11-01-2015, 11:44 AM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 crank bearing
You could also go to the local bearing place and get bearing#6206 and #6306 (as I recall, don't have a book in front of me) I do find it easier to press the bearings into the case halves, then carefully press the crank into the halves, with Yamabond aplied before final mating. Years ago when we did alot of G1 rebuilds, we had a "special tool" that we could do all of this in a vise, no press needed.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
yamaha g2 crank & rod bearing selection | Gas Yamaha | |||
clutch side crank bearing | Gas Yamaha | |||
Yamaha G1 crank bearing | Gas Yamaha | |||
Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha |