|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-06-2015, 12:45 AM | #1 |
Gone Wild
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
|
g1 primary clutch
Need a detailed exploded view or better yet some pictures cuz I'm not too sure how to put this thing back together. I'm pretty sure I have the inside down, I'm not just sure how the spring side goes back together and what parts go where.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2015, 12:56 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: g1 primary clutch
Might help?
|
12-06-2015, 06:35 PM | #3 |
Gone Wild
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
|
Re: g1 primary clutch
yup, thanks
|
12-07-2015, 07:31 AM | #4 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: g1 primary clutch
Not to highjack this thread, but I've got a G1 clutch on a G16 engine. It's a hack job to say the least. I've got the puller bolt--only used it once on the G22 a couple of years ago.
The clutch bolt has washers stacked on it, and I'm wondering if I need to put the washers on the puller, or not. The clutch bolt is shorter than the puller. If I get the clutch off and someone wants it, it's theirs... |
12-07-2015, 01:49 PM | #5 |
Gone Wild
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
|
Re: g1 primary clutch
I'll take it if you're able to get it off
|
12-07-2015, 02:54 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: g1 primary clutch
You shouldnt need any washers...
|
12-07-2015, 03:32 PM | #7 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: g1 primary clutch
I'll give it another shot tomorrow. I didn't try too hard yesterday.
|
12-08-2015, 10:56 AM | #8 |
Gone Wild
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
|
Re: g1 primary clutch
Should the plastic sliders and the rails be lubed? I put some lithium grease on the pins that the weights swivel on it just doesn't seem to slide easily so I'm not sure if this normal or not.
|
12-15-2015, 09:00 AM | #9 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: g1 primary clutch
Apparently there's some stuff missing, but it's off, boxed up and ready to go if you want it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need primary clutch to secondary clutch distance on a G9 | Gas Yamaha | |||
G16 Primary Clutch | Gas Yamaha | |||
G2 primary clutch | Gas Yamaha | |||
g1 primary clutch | Gas Yamaha | |||
g16 primary clutch | Gas Yamaha |