|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-13-2015, 04:57 PM | #1 |
Not Yet Wild
Join Date: Feb 2012
Posts: 27
|
G9 Speed Gear HELP!!!!!
I'm installing a set of speed gears on my Yamaha G9A rearend. I've got it all apart and upon isntallation of the new gears, from CPP, I found that the ID Of the final drive gear, the big one that is bolted in, has and ID of 1.022" and the ID of the gear I removed is 1.142". Obviously the new gear is too small. The spider gear will not insert into it. Has this happened to anyone esle? If so what'd you do to resolve?
I plan to call CPP tomorrow morning to review the options. I'm hoping they sent me the wrong gear. But I'm not holding my breath. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-14-2015, 02:39 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G9 Speed Gear HELP!!!!!
I recently installed the gears in my G2. Got them from CPP didn't have any problems. I wonder if your G9 has the stock rear end or if it got changed over the years. Maybe Tom just sent you the wrong gears.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
12-20-2015, 06:31 PM | #3 |
Not Yet Wild
Join Date: Feb 2012
Posts: 27
|
Re: G9 Speed Gear HELP!!!!!
So long story short. I've got a G9 rear with non G9 internals regarding the spider gear. So I took the gear down to a machine shop and had them bore it out to the appropriat ID. Got the installed and it kicks tail!
|
01-24-2016, 12:35 PM | #4 |
Gone Wild
Join Date: Jun 2015
Location: Philippines
Posts: 570
|
Re: G9 Speed Gear HELP!!!!!
What gears have to be changed?
|
02-11-2016, 02:55 AM | #5 |
Gone Wild
Join Date: Jun 2015
Location: Philippines
Posts: 570
|
Re: G9 Speed Gear HELP!!!!!
Would it be possible your Yamaha is a Japanese version (G15 or G17)?
I have myself a G15 and would be interested by such a kit... What is the result on a 4/5 passengers concerning the torque at start? Isn't it too slow? Regards |
02-11-2016, 03:02 AM | #6 |
Gone Wild
Join Date: Jun 2015
Location: Philippines
Posts: 570
|
Re: G9 Speed Gear HELP!!!!!
(wanted to say too hard and not "too slow")
|
03-08-2017, 07:38 AM | #7 |
Not Yet Wild
Join Date: Mar 2017
Location: Thailand
Posts: 3
|
Re: G9 Speed Gear HELP!!!!!
definitely curious about this as well!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Top Speed with high speed gear and D&D Torque Motor | Electric EZGO | |||
8.1 high speed gear | Gas Club Car | |||
Low speed gear replacement | Gas Club Car | |||
high speed gear set | Golf Carts and Parts | |||
High Speed Gear Kit Help | Gas Yamaha |