|
05-23-2017, 09:24 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2017
Posts: 2
|
Test controller
Any one out there tell me how to test stock Curtis controller on a 93 club car ds. I think I have a bad one but want to be sure before I send it off to be rebuilt.
Let me give a little description of what I have checked. I have tested the solenoid and I'm pretty sure that's not the problem. It clicks and I'm getting 38v on both sides. I've jumped the motor using jumper cables and hooking it up to 2-6v batteries and I can get to go. Also could jump to blue cable on the F/R switch and it will go. I'm not sure why but when I jump with all 36v of batteries won't go. I'm new to all this so forgive me if i sound stupid. Thanks for any help u can give. Sent from my SAMSUNG-SM-G891A using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-24-2017, 10:10 AM
|
#2 |
|
Gone Wild
Join Date: Dec 2010
Posts: 488
|
Re: Test controller
Have a look at chapter 5 pretty standard procedure for Series Controllers
|
|
|
|
|
05-24-2017, 09:08 PM
|
#3 | |
|
Not Yet Wild
Join Date: May 2017
Posts: 2
|
Re: Test controller
Quote:
Sent from my SAMSUNG-SM-G891A using Tapatalk |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| How to test controller | Electric Club Car | |||
| How do you test for a bad controller? | Electric EZGO | |||
| controller test | Electric Club Car | |||
| How to test controller | Electric EZGO | |||
| Test Controller????????????? | Electric Club Car | |||
Linear Mode
