|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-09-2017, 07:57 PM | #41 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
More expensive model http://www.ebay.com/itm/YAMAHA-GOLF-...Zf2YWw&vxp=mtr
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2017, 08:01 PM | #42 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Really wanted to order this one from Amazon as part of bigger order.. https://www.amazon.com/Holdwell-1984...A12JDR3I03IC92
|
06-10-2017, 07:00 AM | #43 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 Newbie questions & pics
id go with the more expensive model
|
06-10-2017, 04:55 PM | #44 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Actually ended up finding a nice universal Genuine Mikuni 14L. per Hr. off ebay for midprice & i know thats a good brand so went with that. Agree about using quality..
|
06-10-2017, 05:04 PM | #45 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
But i do have another Newbie question for all. My mounting joint block for the Carb. has lots of small cracking / drying around inside were mounts or sits flush to engine. Was going to order a new one of these however the ones i've seen on Buggies unlimited & EBAY have a nipple coming out the top of them and mine does not. Is this the right replacement and i just cap off that nipple?
|
06-10-2017, 05:23 PM | #46 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Here is my block with the computer screen shot of Buggies Unlimited in backround..
|
06-11-2017, 11:37 AM | #47 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 Newbie questions & pics
Yup same thing just the newer ones had an air champer that connected on the nipple believe guy on here had same problem and couldn't find same one so he just bought that one and capped it just make sure you seal it well any extra air will make it run poorly
|
06-11-2017, 01:46 PM | #48 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Ya, kinda what i figured, thanks again spicy, just wanted to make sure someone didn't stick a different one on mine and that it was suppose to have a vac line or something going to it originally that would have made it run / start better etc..A lot of "universal parts" for these things i'm starting to learn..
|
06-11-2017, 01:54 PM | #49 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Also sent you another P.M. and here is extreme close up pic. of cylinder cross hatching & connecting rods are brand new.. Light was doing weird shadowing at this close range so sorry about that.
|
06-11-2017, 01:58 PM | #50 |
Not Yet Wild
Join Date: May 2017
Location: Scottsdale Az.
Posts: 39
|
Re: G1 Newbie questions & pics
Compression seems very tight and makes a strong whooooshing noise when turning over by hand.. Not sure if that helps.. lol
|
|
|
Similar Threads | ||||
Thread | Forum | |||
couple more questions, and pics | Gas Yamaha | |||
3 electical questions with pics | Electric EZGO | |||
Newbie with a rattle top and other questions.(Pics) | Electric Club Car | |||
A few questions with pics attatched | Electric EZGO | |||
Carnage Pics w/ questions | Gas EZGO |