|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-06-2017, 10:57 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2016
Posts: 20
|
Jake's 6" Lift Kit G1 Help
I'm in the process of installing Jake's 6" lift kit on my 89' G1. I'm pretty surprised at the amount of fabrication needed for the frame clearance with the primary Sheave. By my measurements, I'll need to notch the frame more than half the diameter to allow for enough clearance. This will require a great deal of fabrication to restructure the frame.
I've searched around for example of what others have done with no success. Has anyone else run into this issue with notching the frame? It would be great if you could provide pictures of an example. I'm trying to figure out the best way to add support back in without a great deal of fabrication. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-09-2017, 04:52 PM
|
#2 |
|
Gone Wild
 Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Jake's 6" Lift Kit G1 Help
http://www.buggiesgonewild.com/gas-y...w-steal-5.html
also depends on what clutch you have new or old |
|
|
|
|
| Tags |
| lift kit, yamaha |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Which is better? Madjax 6" lift or Jake's 6" lift? | Lifted Golf Carts | |||
| Anyone run 25" tires on an RXV W/ 6" Jake's spindle lift | Lifted Golf Carts | |||
| Issue with Jake's 3" Lift Kit on gas RXV | Lifted Golf Carts | |||
| WTT Jake's 6" spindle lift for a 3" | Golf Carts and Parts | |||
| Jake's 6" Spindle Lift Kit | Lifted Golf Carts | |||
Linear Mode
