|
11-29-2017, 07:07 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Brush Guard Suggestions
Looking for a brush guard with a winch plate for a 2008 Carry all. I've been told one for a DS will work. What have y'all found that fits and works well? Thanks......
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-29-2017, 07:29 PM
|
#2 |
|
Not Yet Wild
Join Date: Sep 2017
Posts: 61
|
Re: Brush Guard Suggestions
Hi Brother,Built my own and proud i did. Gives me a good feeling to build something that i know will last.
 |
|
|
|
|
11-29-2017, 07:33 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Re: Brush Guard Suggestions
I don't have any way to build so I was looking to buy. Wish I still had the ability to fab up something.
|
|
|
|
|
11-29-2017, 07:36 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2017
Posts: 61
|
Re: Brush Guard Suggestions
I understand that--- look under for sale ---maybe something there.
|
|
|
|
|
11-29-2017, 08:44 PM
|
#5 | |
|
Gone Wild
 Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: Brush Guard Suggestions
Quote:
As for not having the tools to fab, well,, Is there a better excuse to buy, trade or scrounge them? |
|
|
|
|
|
11-30-2017, 10:19 AM
|
#6 |
|
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Brush Guard Suggestions
Jake's winch bumper
https://www.golfcartking.com/jakes-c...k-powder-coat/ MadJax Armor winch bumper if you wanna get fancy. https://www.golfcartking.com/madjax-...r-club-car-ds/ |
|
|
|
|
11-30-2017, 06:43 PM
|
#7 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 17
|
Re: Brush Guard Suggestions
you might be able to adapt an xrt brush guard- I am not 100% sure they fit but I know the xrt is a cousin to the carryall (in 04 the carryall 294 is the same thing). My 04 xrt has a factory brsh guard- *seems a little flimsy though*-it would protect the cowl if you say dropped a rake on it- but if you hit a tree I doubt it would do much. It has a four bolt hole center section that is a little thicker-metal where you might be able to adapt a winch mount- Maybe someone can confirm suitability.
|
|
|
|
|
11-30-2017, 06:50 PM
|
#8 |
|
Gone Wild
Join Date: Feb 2015
Location: Mi
Posts: 492
|
Re: Brush Guard Suggestions
Here’s mine. Not sure on the brand anymore but it works good.
|
|
|
|
|
11-30-2017, 08:12 PM
|
#9 |
|
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: Brush Guard Suggestions
Do your "oops tubes" go back under the frame.or is the frame end plate reinforced? The stock CC plate will not stand any serious pulling with the winch mounted above it.
|
|
|
|
|
11-30-2017, 08:18 PM
|
#10 |
|
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: Brush Guard Suggestions
One other thing to consider. What ever guard you decide on, check the wall thickness of the tubing it is made of. 65 thou wall tube is only cosmetic, especially if mounting a winch. 120 wall + tube is structural and will stand the stress.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 brush guard | Gas Yamaha | |||
| Mad Jax Brush Guard | Electric EZGO | |||
| Brush Guard | Lifted Golf Carts | |||
| Brush Guard | Golf Carts and Parts | |||
| Which Brush Guard ? | Electric EZGO | |||
Linear Mode
