|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-31-2018, 08:49 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2018
Location: Massachusetts
Posts: 3
|
G1 vibration after new motor mounts were installed....any ideas?
Hi. I had to install new motor mounts in my G1 as let's just say I needed to be towed in. Now that the new mounts are in the machine vibrates so bad you think it will fall a part. Any ideas? Everything looks lined up.
It never had a vibration before. Am I missing something? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-01-2018, 06:21 AM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 55
|
Re: G1 vibration after new motor mounts were installed....any ideas?
Maybe the engine mounting bolts are loose . Loo under the bottom center of cart . Should be 4 bolts .
|
|
|
|
|
08-01-2018, 03:25 PM
|
#3 |
|
Gone Wild
 Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 vibration after new motor mounts were installed....any ideas?
also look at the new engine mounts compared to the old ones.
check the pics I posted here. http://www.buggiesgonewild.com/gas-y...-dampners.html I had that issue with aftermarket mounts. They are different and I found they were rubbing the frame (swingarm) and sending vibrations through it. |
|
|
|
|
08-01-2018, 04:41 PM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2018
Location: Massachusetts
Posts: 3
|
Re: G1 vibration after new motor mounts were installed....any ideas?
I was looking at the same thing.. I thought they were hitting the frame. Thanks I'll cut off that extra plate and post the out come.
|
|
|
|
|
08-02-2018, 04:22 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2018
Location: Massachusetts
Posts: 3
|
Re: G1 vibration after new motor mounts were installed....any ideas?
That was it.. I cut off the small extended piece and no more vibrations
Thanks again! |
|
|
|
|
08-02-2018, 05:16 PM
|
#6 |
|
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 vibration after new motor mounts were installed....any ideas?
 Thing is I don't think the OE mounts are available anymore and all the aftermarket ones seem to be setup this way for some reason. It drove me a little more crazy until I figured it out. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 93 Marathon GE motor Vibration | Electric EZGO | |||
| Anti vibration rubber mounts | Clone Engine Swaps | |||
| Need to secure new motor mounts, any ideas? | Gas EZGO | |||
| 87 ezgo bad vibration in motor | Gas EZGO | |||
| Anyone have pics of G1 with radio installed looking for ideas!! | Gas Yamaha | |||
Linear Mode
