|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-23-2020, 08:22 PM | #1 |
Not Yet Wild
Join Date: Jun 2009
Posts: 23
|
1992 EZ GO Marathon Drive Clutch
Ok. I have removed the Drive clutch, now how do I tell if the clutch is bad?
I've enclosed pictures. Also, is the spring supposed to have a certain number of turns when reinstalled? How do I tell if the spring is weak or bad? EZGO Clutch 01.jpg EZGO Clutch 02.jpg EZGO Clutch 03.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-24-2020, 09:03 PM | #2 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 1992 EZ GO Marathon Drive Clutch
Looks good. The three levers should be free to move up and down and they look that way. No clocking on this spring. Just put it back. The rear driven clutch is the one that has to be clocked.
|
05-25-2020, 12:15 AM | #3 |
Not Yet Wild
Join Date: Jun 2009
Posts: 23
|
Re: 1992 EZ GO Marathon Drive Clutch
Thanks for the response trig 123.
Mine moves freely. There was some dust build up when I took it apart,but I blew that off. I can lift the move able section and it slides right back down,with no hang ups. Are the 3 fingers just centrifugal weights? I guess the only thing that can go bad is the spring break or it locks up somehow from gunk accumulation. It looks to me like you could take the fingers out if needed, by removing the socket head cap screws. Is this correct? I thought these weren't repairable. Is there a service manual available on here for download? |
05-25-2020, 07:39 AM | #4 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: 1992 EZ GO Marathon Drive Clutch
Quote:
Are the 3 fingers just centrifugal weights? Yes |
|
05-25-2020, 10:08 AM | #5 |
Not Yet Wild
Join Date: Jun 2009
Posts: 23
|
Re: 1992 EZ GO Marathon Drive Clutch
Thanks trig 123.
I guess I'll put it back together and look at the driven clutch on the rear end. I think after I put it back together I'll put it on jack stands and run it and see what I can figure out. Thanks for your help, it's greatly appreciated. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
help with 83 marathon drive clutch | Gas EZGO | |||
Marathon Drive Clutch | Gas EZGO | |||
drive clutch on 85 marathon | Gas EZGO | |||
1992 EZ-GO drive clutch removal | Gas EZGO | |||
wtb marathon drive clutch | Golf Carts and Parts |