08-15-2020, 10:15 AM | #1 |
Not Yet Wild
Join Date: Aug 2020
Location: Spring Hill, FL
Posts: 5
|
1989 e z go gas
I have replaced all of the wiring on this cart and most of the electrical components. After reassembling everything, i think i have something wired wrong. The wire from D- to my solenoid is heating and burning. The igniter has a blue and red to the engine, along with an orange to the coil and a yellow to the solenoid. But there is also a black from the igniter that I don’t know where it is to go. Possibly to the regulator? As it says at the title Lin this is an 89 e z go and i have yet to find any manuals for it, so i feel i am shooting in the dark.
Any help would be greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2020, 10:34 AM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,491
|
Re: 1989 e z go gas
This is the full 89 manual. Each chapter is broken down into a pdf. https://app.box.com/s/3habgxrtgz
I would suggest moving the D- wire directly to the bottom lug of the FnR switch. That is the main ground. If you look at chapter 14 page L-22, you will see the black wire from the ignitor connects to D- of the voltage regulator. That means the black wire is also a ground. |
08-15-2020, 12:26 PM | #3 |
Not Yet Wild
Join Date: Aug 2020
Location: Spring Hill, FL
Posts: 5
|
Re: 1989 e z go gas
This helps a lot! Thanks for the help!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1989 gxi-800 | Electric EZGO | |||
1989 Gas CC | Gas Club Car | |||
Value of 1989 G2. | Gas Yamaha | |||
1989 Run then don't run??? | Gas EZGO | |||
1989 ez go need some help plz | Gas EZGO |