|
02-08-2021, 08:57 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2018
Posts: 23
|
Aftermarket air intake
Has anyone had success with an aftermarket air filter mounted close to the carb? I’m assuming a bigger jet and a primer may be needed.
I want to cram as much air and fuel into this little engine to see what it can do. Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-09-2021, 05:06 PM
|
#2 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 6
|
Re: Aftermarket air intake
You can put on a Mikunni 22MM carb. You will need to build an adapter but can buy some of the flanges online. The Porcellato Club car repair manual has a detailed diagram on how to build it, very very detailed.
I myself just put in a K&N and bigger main jet. |
|
|
|
|
02-09-2021, 05:26 PM
|
#3 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Aftermarket air intake
This little engine is only going to do what the counterbalance weight and link rods will allow it to do... throw in as much air and fuel as you want. Once you hit the magic rpm you’ll get a really nice view of the inside of the engine from the rear.
 |
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New air intake | Gas Club Car | |||
| aftermarket air intake carb tuning issues please help | Gas Club Car | |||
| Aftermarket intake adapter for g9 | Gas Yamaha | |||
| Air intake | Gas Club Car | |||
| Air intake? | Gas Club Car | |||
Linear Mode
