Rear clutch removal

[kwik123]

Finally got my clutch off last night. I used a 7-ton puller and a hardened bolt. I used a 1/2" ratchet to turn the puller as far as i gould by hand,then had to use a pipe on the end. It finally gave up and popped off. What a pain in the ***.........

[troytrent]

Originally Posted by troytrent

Finally got the clutch off, after some heat and a ball joint remover and about four different tries, back is out could only work on it for a while at a time, only cost me 268 for a new power kit and a new spring that I will not use now,,, power kit, clutch and belt 218 shipped from Franklingolfcart.com

I was taken the clutch off put add a spring it wasn't pulling hills very well, it stall on the ramps when i loaded into the trailer, didn't use the spring and missed up the stock clutch, with the new power clutch it really made a big difference, went right up this steep bank in my yard with me and my boy, no way this would have done it without the new clutch, took GPS out with us it showing running 25mph with 23 inch tires, so I'm happy with it,