|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-19-2014, 01:26 PM | #1 |
Not Yet Wild
Join Date: Nov 2014
Posts: 27
|
EZGO field winding open
hey guys! New to the forum. Though I do use it research quite often. I'm currently having trouble with an EZGO TXT in the shop. It is equipped with the PDS system and the diagnostic code told me the solenoid was welded shut. So, I replaced the solenoid, and voila! The cart ran! But only for a short period. So, I brought it back in the shop and ran the diagnostics again. This time it gave me the code for the fields winding open, so we pulled the motor and sent it out to get rebuilt. We get the motor back, install it (double-checking our wires) and the cart ran reallllllly slow. at this point we thought "well maybe the batteries need a charge". Long story short, we charged it up, but the diagnostic system is still telling me the fields are winding open. Anyone ever had a similar issue?
And thanks for your help!!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2014, 01:38 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZGO field winding open
If the field windings test good (less than 5 ohms), and the field wires are good (and not worn through to the frame at the back of the battery tray). Next suspect is a bad controller.
|
11-19-2014, 02:12 PM | #3 | |
Not Yet Wild
Join Date: Nov 2014
Posts: 27
|
Re: EZGO field winding open
Quote:
Am I supposed to get 5 ohms constant? Or is that just when I hit the accelerator? |
|
11-19-2014, 03:56 PM | #4 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO field winding open
Quote:
Yes, it should be a constant value. You are measuring the resistance of several feet of of thin copper wire. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New to me 96 DCS with Alltrax DCX 300 open field error | Electric EZGO | |||
Open field error with alltrax dcx300 on a 1996 or 1997 dcs | Electric EZGO | |||
98 ezgo WIDE OPEN ONLY | Electric EZGO | |||
Why no field winding bolts? | Electric Club Car | |||
4hp field coil kits for ezgo 36volt | Electric EZGO |