|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-14-2015, 05:28 PM
|
#11 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Changed controller on 09 rxv and nothing happens
If it was stinking/burning, it is now damaged, and will need to be replaced. No testing needed.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-14-2015, 07:26 PM
|
#12 |
|
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: Changed controller on 09 rxv and nothing happens
Ok. And you said brake will cause cart to not do anything?
|
|
|
|
|
03-14-2015, 07:48 PM
|
#13 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Changed controller on 09 rxv and nothing happens
Depending on controller SW version, brake is on the list of things that a test fail can shut down the whole operation.
|
|
|
|
|
03-14-2015, 08:35 PM
|
#14 |
|
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: Changed controller on 09 rxv and nothing happens
Ok so I guess I'm gonna change brake and see what happens
|
|
|
|
|
03-14-2015, 10:09 PM
|
#15 |
|
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: Changed controller on 09 rxv and nothing happens
If I change brake and nothing changes what would be my next step?
|
|
|
|
|
03-15-2015, 12:24 AM
|
#16 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Changed controller on 09 rxv and nothing happens
Gain access to a handheld programmer to check error codes and input signals. And the "rxv troubleshooting guide" fro ezgo is on this site. It tells you all the values of the input & outputs of the controller. You must know what controller model you have (2012 & prior = danaher, 2012.5 & newer = curtis).
|
|
|
|
|
03-15-2015, 09:20 AM
|
#17 |
|
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Changed controller on 09 rxv and nothing happens
Bunch of Threads on this site about RXV brake and battery problems....
PLEASE READ... Brake and battery problems top the list of RXV bugaboos. Bad or failing Batteries will cause brake lock up at speed which damages parking/emergency causing brake failure.(like you are describing). Brake on motor is parking/emergency brake. It is not used to slow a moving cart under normal driving conditions. Slamming on brakes(wheel lock up/skid) engages parking brake and will cause failure. Use care replacing parking brake. end of motor must be clean and rust free. Do not over tighten bolts, will post instructions for changing brake in a few min... |
|
|
|
|
03-15-2015, 06:46 PM
|
#18 |
|
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: Changed controller on 09 rxv and nothing happens
Thanks I appreciate it
|
|
|
|
|
03-15-2015, 09:37 PM
|
#19 |
|
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: Changed controller on 09 rxv and nothing happens
Should I put old controller back on when I change brake?
|
|
|
|
|
03-16-2015, 04:52 PM
|
#20 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Changed controller on 09 rxv and nothing happens
Your old controller was probably fine, just brake fail stopping it from running.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 96 PCX Changed Controller to ITS? need help | Electric EZGO | |||
| Changed from a TXT to A PDS.... | Electric EZGO | |||
| Changed My Oil | Gas golf carts | |||
| Changed motor and controller | Electric EZGO | |||
| Changed Cables /won't Run | Electric Club Car | |||
Linear Mode
