Club Car DS help please

[yamahaguy97]

Originally Posted by Sergio

It looks like that 1/2 speed micro-switch (#3) is either bad or miss-wired.

Take the 3 wires out of the switch: Green, white and black.

Connect the Green and White wires together.

Test if the cart runs.

ok so if i connect white and green it should make it run in FORWARD?? if not its either bad or miss wired right

[Sergio]

It should run in both directions.

If it does, test the microswitch.

What year is it? I can link a diagram.

[yamahaguy97]

Originally Posted by Sergio

It should run in both directions.

If it does, test the microswitch.

What year is it? I can link a diagram.

sorry don't know the year off the top of my head, but maybe if you send the diagram anyway it will be the right one. 48 volt club car DS with V glide NO run/tow switch

thank you

[Sergio]

This covers 1995-2003 DS Series with Multi-Step Potentiometer:

http://www.buggiesgonewild.com/attac...car_ds_48v.jpg

[yamahaguy97]

Ok if this helps, the DS im working on has a center micro switch with GREEN, White and black wires coming from it. So, green goes to green, black to black and white to white in the harness. Unless its not supposed to be that way??

steve

[yamahaguy97]

by the way serg, I tested all three micro switches for continuity and they checked out ok. Because of that is it possible the F/R switch has a problem in forward?? I feel like tahoedawgz has a good idea about the OBC??

[yamahaguy97]

holy crap I think i know whats wrong here now...lol I think I have 2 of the 3 switches in the wrong sequence. The switch with the green, black, and white wires built in should be on the outside...right now its in the Middle!!

wow that was a knuckleheaded move

[Sergio]

Yep, You got it, the FNR center cam is for the reverse buzzer so it only has a cam lobe when the lever is flipped to reverse

[yamahaguy97]

Originally Posted by Sergio

Yep, You got it, the FNR center cam is for the reverse buzzer so it only has a cam lobe when the lever is flipped to reverse

thanks for your help buddy, I still can't believe I did a stupid thing like that

[TahoeDawgZ71]

I was reading this thread and ready to post your solution but it looks like you just found it. Good job.