|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-19-2017, 02:38 PM | #1 |
Not Yet Wild
Join Date: Feb 2017
Location: Ny
Posts: 12
|
Installing Curtis 1268 controller
Need some help installing my plumb quick executioner motor with new Curtis 1268 controller ok so I have it in connected all the wires as per diagram old controller has a 4 pin plug does this get used ? Also it came with an on the fly torque /speed toggle switch clueless on that lol one last thing does the 6 pin coming out of 24 pin connector plug into the 6 pin slot on controller should be noted cart is 48v 2012 precedent
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2017, 08:19 AM | #2 |
Not Yet Wild
Join Date: Feb 2017
Location: Ny
Posts: 12
|
Re: Installing Curtis 1268 controller
Did a lot of research figured it out cart runs awesome plumb quick you are great speed setting cart does 15 up a steep hill and unable to run on long flat road to see top speed but the short distant I did go reached high twenties sure it will top out close to mid thirties
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Curtis 1268 Controller | Electric Club Car | |||
Curtis controller mod. 1268-5403 | Golf Carts and Parts | |||
Curtis 1268 Controller | Electric Club Car | |||
Anyone using a Curtis 1268 Sepex controller | Extreme DC! | |||
Curtis 1268 400 amp controller? | Golf Carts and Parts |