|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-02-2014, 12:33 PM | #1 |
Not Yet Wild
Join Date: Apr 2014
Posts: 41
|
Alltrax controller question
I have a 1998 ezgo electric cart and recently replaced the soloniod and the controller to a alltrax controller with 5 prongs , before old controller died I had no issues with the cart, after replacing controller the cart will run sometimes and won't run another I checked to see of the light is green when the pedal is pressed and this is when the cart has stopped and it doesn't light up but the soloniod clicks, any ideas what's going on would be really appreciated!!! Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-02-2014, 12:49 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax controller question
Using a jumper wire bring 36v + to controller pin #1
If the green light comes on check your wire to pin #1 If it does not come on check your connection B- to battery pack main Neg If power to #1 and at B- then controller has a problem |
06-02-2014, 01:07 PM | #3 |
Not Yet Wild
Join Date: Apr 2014
Posts: 41
|
Re: Alltrax controller question
To bring 36v to controller PIN number 1 do I jump it front the positive on the battery?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax Controller Pro Question | Electric EZGO | |||
Alltrax Controller Question | Electric EZGO | |||
AllTrax DCX400 Controller Question | Electric EZGO | |||
Alltrax Controller / Soleniod Question | Electric EZGO | |||
question about alltrax controller | Electric EZGO |