|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-22-2019, 06:05 PM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 18
|
RXV Accelerator Return Cable Snapped
It appears the small cable that attaches the return spring to the accelerator pedal on my 2014 rxv has snapped. Does anyone have a replacement part number on hand, or a link to a parts diagram I can look it up?
Sent from my Pixel 2 XL using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-22-2019, 06:46 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: RXV Accelerator Return Cable Snapped
That question has been ask many times here. EZGO said that they never put them on any RXV carts. They have only been found on Fleet cart. So what is believed third party Fleet distributor or something like that installed them.
|
08-22-2019, 09:57 PM | #3 |
Not Yet Wild
Join Date: Aug 2018
Posts: 18
|
Re: RXV Accelerator Return Cable Snapped
That's too bad there are no replacements. I first tried the rubber hose idea I had seen Bob Boyce mention on the ends of the spring to tighten the spring, but that still was not strong enough to consistently return the pedal to the full upright position. So I made my own return cable with some braided wire and crimps. Time will tell if it lasts or not.
Sent from my Pixel 2 XL using Tapatalk |
08-23-2019, 03:19 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV Accelerator Return Cable Snapped
These are the craziest things I ever seen for electric ezgos! Maybe belongs in the gas section...
If I had only known ... Can't stand the kawi ezgos, might as well buy a clubcar. Yamaha gassers for ever! Never buy a gasser that isn't Yamaha! |
08-23-2019, 07:25 AM | #5 |
Not Yet Wild
Join Date: Aug 2018
Posts: 18
|
Re: RXV Accelerator Return Cable Snapped
This is an electric EZGO...
Sent from my Pixel 2 XL using Tapatalk |
01-08-2023, 02:40 PM | #6 |
Not Yet Wild
Join Date: Jun 2018
Posts: 2
|
Re: RXV Accelerator Return Cable Snapped
My fix was similar. The 2011 model had a loop of wire that broke. I got another new piece of stainless wire, as big as would fit in the notch.
I got the length for the new wire from the old loop and wound the new wire into the old loop and soldered it, along the entire length of both legs of the loop. That way, the original metal ball stays attached. You really need the flux. It will never work without that. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Accelerator return spring | Electric Club Car | |||
RXV Accelerator Return Spring | Electric EZGO | |||
Brake cable snapped, disc brake conversion? | Electric EZGO | |||
Accelerator Cable | Gas Club Car | |||
Accelerator Cable | Gas EZGO |