|
09-07-2021, 06:46 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2021
Location: Kansas City, MO
Posts: 7
|
Add Turn Signals | Need How To
Hey all, my cart currently has headlights with switch (high low beam) by the ignition as well as tail lights/brake lights but no turn signals. Can I add this in with a wiring harness and left right switch on the steering column? I assume so as I believe there are a few that come this way from factory, im just not sure what exactly to buy. Anyone done anything like this to theirs and can provide some guidance or at least what to buy?
I have a 2021 EZGO S4 Express Elite Lithium 2.0 Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-07-2021, 07:13 PM
|
#2 |
|
Gone Wild
Join Date: May 2021
Posts: 289
|
Re: Add Turn Signals | Need How To
Factory harness has a plug play. I think its an 8 pin connector. Should be behind the dash above the cupholders.
|
|
|
|
|
09-07-2021, 07:48 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2021
Location: Kansas City, MO
Posts: 7
|
Re: Add Turn Signals | Need How To
Hi Scott,
Sorry not really following. You're saying the factory harness already supports it and all I need is the left/right switch that mounts on the steering column and its pretty much plug and play from there? Thanks |
|
|
|
|
09-07-2021, 08:42 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2021
Location: Kansas City, MO
Posts: 7
|
Re: Add Turn Signals | Need How To
I think I need #7 from here for the actual turn signal. Then #5 to hide the wires.
Do you know what #13 is for and also do I need different lights on front or rear for the flashers? |
|
|
|
|
09-09-2021, 10:31 AM
|
#5 |
|
Gone Wild
Join Date: May 2021
Posts: 289
|
Re: Add Turn Signals | Need How To
Heres the OEM part numbers. 615236, thats the turn signal switch assembly. 20965G3, steering column cover and 6644706, horn jumper. You will also need the 2 corner lights in the front if you dont have them already. They just plug in. The plug is sip tied to the headlight wires. The ones we use are made by JW speaker. I dont know the part number.
|
|
|
|
|
09-10-2021, 01:06 PM
|
#6 |
|
Not Yet Wild
Join Date: Sep 2021
Location: Kansas City, MO
Posts: 7
|
Re: Add Turn Signals | Need How To
Awesome, thanks Scott!
|
|
|
|
|
09-10-2021, 02:40 PM
|
#7 |
|
Gone Wild
Join Date: May 2021
Posts: 289
|
Re: Add Turn Signals | Need How To
Very welcome. Glad to help.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Turn signals | Gas Yamaha | |||
| turn signals | Gas Yamaha | |||
| Turn signals | Electric Club Car | |||
| Turn signals | Electric EZGO | |||
| Turn signals...again | Electric EZGO | |||
Linear Mode
