09-23-2022, 07:27 PM | #11 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,683
|
Re: No Spark CCW fe290
They do. In the meantime it won’t hurt anything to run it without it, as long as your governor is working correctly. If you have stock size tires keep it under 18-19mph as that’s usually when the rev limiter starts to kick in and you’ll be fine until you can find one
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-25-2022, 08:46 PM | #12 | |
Gone Wild
Join Date: Jun 2016
Posts: 647
|
Re: No Spark CCW fe290
Quote:
However it seems someone messed with this one so that it idles full time, and only shuts off with the key. I remember seeing guys post about doing this but I am not sure how its done so I need to research that so I can reverse that mod |
|
09-25-2022, 09:12 PM | #13 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,683
|
Re: No Spark CCW fe290
I would check the wiring diagram and make sure everything is wired correctly and nothing is bypassed
|
09-28-2022, 10:00 AM | #14 | |
Gone Wild
Join Date: Jun 2016
Posts: 647
|
Re: No Spark CCW fe290
Quote:
Revolution told me OEM no longer available, went with the Rhox Rev limiter that was available from him. Put it on last night and everything works as it should. Hopefully the Rhox carb works as well Noticed cart still wants to stay running sometimes but not as often when drivetrain is back together with all belts on. Going to check the wiring and then run it a little bit to make sure its not some kind of odd bug since its been sitting |
|
09-28-2022, 10:24 AM | #15 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,683
|
Re: No Spark CCW fe290
Make sure the cam in the black box is moving all the way to release the microswitches inside the black box. And make sure the carb throttle plate closes ALL the way when you release the pedal
|
09-28-2022, 10:29 AM | #16 | |
Gone Wild
Join Date: Jun 2016
Posts: 647
|
Re: No Spark CCW fe290
Quote:
is the throttle plate the pivoting piece on top of the carb? thanks |
|
09-28-2022, 10:49 AM | #17 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,683
|
Re: No Spark CCW fe290
Correct and correct. You’ll see how when you press the pedal the 2 microswitches “drop” into the round part of the pie and when you release the pedal they jump onto the “shelf” at the edge of the pie. Make sure when you release the pedal they are on that “shelf”.
You should set the pedal and everything as follows When you depress the pedal, the pedal moves about an inch before the microswitches click in the black box. Then press the pedal another half inch before the throttle plate begins to move. |
09-30-2022, 07:22 AM | #18 | |
Gone Wild
Join Date: Jun 2016
Posts: 647
|
Re: No Spark CCW fe290
Quote:
both of those seem to be set correctly/engaging correctly. I moved the cart yesterday and realized it is only the starter generator that continues to spin. I thought the motor was trying to start but its really just turning the clutch so its clanging, but its only the starter turning for a couple seconds after you let off the pedal Not sure if that would help anyone with a diagnosis or not but thats whats happening |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
94 fe290 motor Spark plug | Gas Club Car | |||
1991 FE290 suddenly a REALLY weak spark and no run? | Gas Club Car | |||
97 fe290 head on 95 fe290?? | Gas Club Car | |||
Club Car FE290 Intermittent spark problem!! | Gas Club Car | |||
fe290 won't spark | Gas Club Car |