07-13-2009, 05:30 PM | #1 |
Not Yet Wild
Join Date: May 2009
Location: northen va.
Posts: 12
|
need some advise
hi every one. im getting ready to build a robin 290 motor. building motors is not new to me. but i am used to 8cyls not 2. i dont mind taking a motor to its limits. ive read a lot of threads on here and some say you can get 15hp or more out of this engine and others say you cant. face it any one can buy a big block. but whats the fun in that. if some one can guild me in the right way i would be thankful. thanks again mike
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2009, 09:25 AM | #2 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: need some advise
Quote:
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
07-15-2009, 09:51 AM | #3 |
Gone Wild
Join Date: Jun 2009
Location: BROOK PARK, OH
Posts: 194
|
Re: need some advise
If your going into the motor already I would consider the 350 w/ a 295 head. I did it to mine and the difference is amazing.
|
07-15-2009, 05:21 PM | #4 |
Gone Wild
Join Date: Apr 2009
Location: indiana
Posts: 274
|
Re: need some advise
im yet to try that bill, gonna be a few months till i can, let you know how much of an improvment i see in it
|
07-15-2009, 05:50 PM | #5 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: need some advise
my two cents is if you have a usable 295 build it, the 350 with the 295 head does work well. but you need to find the 350 block! there around but they go for a good buck and you can get the same outcome with the engine you have.
as you already know, HP and torque don't always go hand in hand! the v twins give you alot of torque at low rpm's and the 295/350's need to turn fast to make power. the ignitor has a rev limiter so you will need to upgrade the iginition as well as other things. |
07-15-2009, 07:27 PM | #6 |
Not Yet Wild
Join Date: May 2009
Location: northen va.
Posts: 12
|
Re: need some advise
i a msd box that i was going to use. i was wondering how much i should take off the block. ive all ready ported and polished the head putting ss vaules in with race springs. this weekend. wondering about cam.
|
07-15-2009, 07:37 PM | #7 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: need some advise
the block may or may not need to be decked, your piston choice will determine that.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Tire Decision Advise | Lifted Golf Carts | |||
Considering a Workhorse, Please advise | Gas EZGO | |||
Need advise | Electric EZGO | |||
24hp honda advise | Gas Club Car |