|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-01-2008, 04:24 PM | #1 |
Not Yet Wild
Join Date: Aug 2008
Location: Hubbard, Oregon
Posts: 42
|
Resistor wiper contact board
I've got a question about my contact board that my wiper runs across. It seems that the wiper doesn't go all the way to the last contact. It looks like it is only passing over the first four and not reaching the fifth.
I know I need to replace the wiper itself, it is pretty worn down. Is there an adjustment that I can make to make it cross the entire board? Am I missing out on power or speed because it is not going all the way? '82 ezgo marathon. good batts. 4 guage cables. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2008, 07:11 PM | #2 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Resistor wiper contact board
Take the rod loose from the wiper and adjust it to get full travel. Yes it want run wide open if it doesn't get the last contact.
|
09-25-2013, 08:56 PM | #3 |
Not Yet Wild
Join Date: Sep 2013
Posts: 4
|
Re: Resistor wiper contact board
|
|
|
Similar Threads | ||||
Thread | Forum | |||
85 Club Car F&R switch contact wiring | Electric Club Car | |||
Rebuilt G1 sounds like piston/plug contact | Gas Yamaha | |||
eastcoastcustomcartsinc contact info | Golf Carts and Parts |