KF82 Engine torque specs

scottyb · 09-13-2009, 10:29 PM

Thought I had it

I need the engine torque specs for the old 341 Flathead

Thank you in advance if you can post them or link me to em

scottyb · 09-14-2009, 09:34 AM

There were about 500,000 of these engines built

somebody has to have the repair manual....? Well I couldn't find the info on the net? Guess I will have to go with torque recommendations for specific size bolts?

Murphy · 09-14-2009, 10:50 AM

cylinder head bolts 16-18 ft-lbs
cylinder bolts 25-29 '' ''
connecting rod bolts 29-30 '' ''
side cover bolts 14-16 '' ''
flywheel nut 60-65 '' ''
spark plug 15-20 '' ''
crankcase bolts 14-16 '' ''
cylinder head shroud 8-10 '' ''
engine mounting nuts 25-30 '' ''

Anything else ?

ShineRunner · 08-17-2011, 06:22 PM

Quote:

Originally Posted by Murphy

cylinder head bolts 16-18 ft-lbs
cylinder bolts 25-29 '' ''
connecting rod bolts 29-30 '' ''
side cover bolts 14-16 '' ''
flywheel nut 60-65 '' ''
spark plug 15-20 '' ''
crankcase bolts 14-16 '' ''
cylinder head shroud 8-10 '' ''
engine mounting nuts 25-30 '' ''

Anything else ?

Great information. I am just ready to put my ole 91 KF82 back together and need the valve clearance spcifications.

Thanks

jace1975 · 08-17-2011, 11:52 PM

Manual says .004 to .008 clearance.

Jason

ShineRunner · 08-18-2011, 06:40 AM

Is that on both valves? .004 to .008 or .004 intake and .008 exhaust. Sorry to be so specific. Just wanting to be sure. Thanks

Paul Dobbin · 09-16-2018, 07:44 PM

Quote:

Originally Posted by samsmith

dude, the horsepower for flat head i seen that it has 700 plus horse power. i got this info from my friend in Washington auto repair shop. hope this helps.

What is the bolt in replacement for my 8.5 HP flathead? I need more power

Paul Dobbin · 10-10-2019, 07:20 PM

I would guess the lack of a reply would indicate there is no bolt in replacement.
To bad. What is the strongest later club car that sits low like the DS? I need low for going across steep hills laterally.

Copperman61 · 12-03-2019, 10:08 AM

I am putting together my '91 kf82 as we speak , thanks for the torque specs.

darylandsteve · 05-25-2017, 07:01 PM

yes! can you tell me what the pto shaft diameter is for this motor? A friend and I are replacing one on a "91 CC and want to use the stock clutch/torque converter system! ANY help would be appreciated! Thanks! God Bless!

09-13-2009, 10:29 PM	#1
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	KF82 Engine torque specs Thought I had it I need the engine torque specs for the old 341 Flathead Thank you in advance if you can post them or link me to em

09-14-2009, 09:34 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: KF82D Need Engine torque specs There were about 500,000 of these engines built somebody has to have the repair manual....? Well I couldn't find the info on the net? Guess I will have to go with torque recommendations for specific size bolts?

09-14-2009, 10:50 AM	#3
Murphy Not Yet Wild Join Date: Jul 2009 Location: Northwest Washington Posts: 67	Re: KF82D Need Engine torque specs cylinder head bolts 16-18 ft-lbs cylinder bolts 25-29 '' '' connecting rod bolts 29-30 '' '' side cover bolts 14-16 '' '' flywheel nut 60-65 '' '' spark plug 15-20 '' '' crankcase bolts 14-16 '' '' cylinder head shroud 8-10 '' '' engine mounting nuts 25-30 '' '' Anything else ?

08-17-2011, 11:52 PM	#5
jace1975 Gone Wild Join Date: Jul 2011 Location: SE KS Posts: 269	Re: KF82 Engine torque specs Manual says .004 to .008 clearance. Jason

08-18-2011, 06:40 AM	#6
ShineRunner Not Yet Wild Join Date: Jun 2011 Posts: 10	Re: KF82 Engine torque specs Is that on both valves? .004 to .008 or .004 intake and .008 exhaust. Sorry to be so specific. Just wanting to be sure. Thanks
ShineRunner Not Yet Wild Join Date: Jun 2011 Posts: 10

10-10-2019, 07:20 PM	#8
Paul Dobbin Not Yet Wild Join Date: May 2014 Location: Smoky Mountains Posts: 31	Re: KF82 Engine torque specs I would guess the lack of a reply would indicate there is no bolt in replacement. To bad. What is the strongest later club car that sits low like the DS? I need low for going across steep hills laterally.

12-03-2019, 10:08 AM	#9
Copperman61 Gone Wild Join Date: Aug 2017 Location: Doradotown,Fl. Posts: 154	Re: KF82 Engine torque specs I am putting together my '91 kf82 as we speak , thanks for the torque specs.

05-25-2017, 07:01 PM	#10
darylandsteve Not Yet Wild Join Date: Apr 2017 Posts: 2	Re: KF82D Need Engine torque specs yes! can you tell me what the pto shaft diameter is for this motor? A friend and I are replacing one on a "91 CC and want to use the stock clutch/torque converter system! ANY help would be appreciated! Thanks! God Bless!
darylandsteve Not Yet Wild Join Date: Apr 2017 Posts: 2

Similar Threads
Thread	Forum
torque specs	Gas EZGO
Online torque specs	Gas Yamaha
need kf82 crank specs	Gas Club Car
torque specs for Yamaha G14	Gas Yamaha
need engine specs for KF82-FZ340	Gas Club Car