|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-22-2017, 01:13 PM | #1 |
Not Yet Wild
Join Date: Feb 2012
Posts: 35
|
Plastic grommets on linkages
Does anyone know where you can buy the plastic grommets that are used to hold the throttle linkages in place on a gas ds, 1989 in particular. The one I am in need of goes where a pin connects to the throttle assembly. see the pic attached
please advise, thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2017, 03:26 PM | #2 |
Not Yet Wild
Join Date: Feb 2012
Posts: 35
|
Re: Plastic grommets on linkages
Anyone know what I'm talking about? I think its number 41 in the diagram, but 42 is not available. Does 41 look like the same thing to anyone?
|
02-26-2017, 04:33 PM | #3 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: Plastic grommets on linkages
Your pictures are not showing up.
Try again and maybe someone could help you out. Sorry it was just my computer, Internet must have quit for a minute? |
02-26-2017, 09:34 PM | #4 |
Not Yet Wild
Join Date: Aug 2016
Posts: 6
|
Re: Plastic grommets on linkages
These guys should have it.
golfcartpartsdirect.com/index.phpapp=ecom&ns=catshow&ref=1998-1999ClubCarGasElectric&sid=z91g3879jdlekv71w8wa0ct 1xh9q2854 |
02-27-2017, 09:14 AM | #5 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: Plastic grommets on linkages
If Golf Cart Parts Direct doesn't have them, they're probably going to be hard to find. You can either scour your local craigslist for junked carts, or maybe try and find something similar at a hardware store.
|
02-27-2017, 10:45 AM | #6 |
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: Plastic grommets on linkages
Anybody try a decent small engine shop?
|
03-01-2017, 07:14 PM | #7 |
Not Yet Wild
Join Date: Feb 2012
Posts: 35
|
Re: Plastic grommets on linkages
did anyone see number 41 on that diagram from golfcartpartsdirect? do you think number 41 is the same as 42?
41 is called "throttle plate bushing" |
04-06-2017, 07:40 PM | #8 |
Not Yet Wild
Join Date: Feb 2012
Posts: 35
|
Re: Plastic grommets on linkages
So I can't seem to find anything anywhere that will work for this, does anyone know a work around for this. Because with out this little piece of plastic my cart is unusable, next to just tying the throttle open.
Thanks |
04-07-2017, 06:38 AM | #9 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: Plastic grommets on linkages
You could see if a "Door Lock Rod Clip" would work, (plastic retainer that holds the linkage to the lock cam on vehicles)
Most DIY auto parts stores have a bunch of different sizes in their "help section" for a reasonable price! 9111638_rnb_75451_pri_larg.jpg |
04-07-2017, 06:45 AM | #10 |
Getting Wild
Join Date: Aug 2014
Location: indiana
Posts: 77
|
Re: Plastic grommets on linkages
i'll take a look on my cart an see if #41 is the same as #42. i know on mine one of the #42's is getting loose an the linkage pops out easy.
|
Tags |
bushing, grommet, plastic, rummer, throttle |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Predator 420 choke and throttle linkages need ideas | Clone Engine Swaps | |||
Question about BB conversion throttle linkages. | Big Block Talk! | |||
98 CLub Car alignment and grommets | Electric Club Car | |||
98 CLub Car alignment and grommets | Big Block Talk! | |||
EZ-GO 1992 Silver E rubber grommets | Gas EZGO |