|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-23-2015, 08:20 AM | #11 |
Not Yet Wild
Join Date: Mar 2011
Posts: 32
|
Re: G22 primary won't come off, seriously
Yeah once in the spring, and once in the fall. I run it all winter, and I wouldn't do it without my posi kit. Got the rollers replaced and re-installed the clutch last night. Torqued the bolt to 48 ft. lbs. I pulled the whole motor out to clean underneath it, then dropped her back in and she ran great. I gave the primary two pumps, which was enough to get new color grease to come out of the weep hole in the seal. Wiped off the excess, and fired it up to check if the rollers were performing properly, and free of grease. Gave the secondary one pump and didn't see any come out anywhere, even after I ran it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 primary replacement | Gas Yamaha | |||
primary clutch | Gas Yamaha | |||
Primary Clutch HELP!!!! | Big Block Talk! | |||
g1 primary clutch | Gas Yamaha | |||
G9-g16 primary clutch | Gas Yamaha |