|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-21-2009, 07:04 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Posts: 3
|
G9 Jetting Help and Tie Rods
I have a Yamaha G9 Golf Cart with a clamp on air filter and have the throttle cable routed straight to the carb. It seems like it needs to be jetted. Is there any aftermarket jet for it? Also i would like to make it faster and have a little more power. What else can i do to it to make more power without having to put a new motor in it. If i do decide to put a new bigger motor in it what should i go with and where would be the place to get one? Also my tierods ends and tie rod are bent. Is there any stronger upgraded tie rods i can use? Or wheres the cheapest place to get new tierods and ends. Also on last question... i got the cart with no side seat handles, where can i get new ones of them?
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-21-2009, 08:16 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G9 Jetting Help and Tie Rods
These guys can help with all of your needs. http://www.cartpartsplus.com/carb-je...11-lifted.html
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
need a jetting recommendation for a g16 | Gas Yamaha | |||
Water Jetting! | Design Center | |||
K&N and jetting questions? | Gas Club Car | |||
Honda EVO 24hp Jetting | Big Block Talk! | |||
carb jetting | Gas Yamaha |