|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-28-2010, 06:56 AM | #11 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: lack of power on fe290 after mods
Here's what I did to "Jury Rig" the same situation on my cart,
Get a flexible (rubber) 1 1/4" "P Trap" from your local hardware store or do it yourself center, with an 1 1/4" plastic straight tube... and 4 hose clamps, cut up the P Trap and make it into an "S", and it should come out something like this.... (It's not pretty... but it works!) Note: I am in the process of redoing it right now with a B&S 90 degree intake tube, I'm taking pics and will start a new thread! Before... and... after |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2010, 01:46 PM | #12 |
Not Yet Wild
Join Date: May 2010
Posts: 11
|
Re: lack of power on fe290 after mods
just what i needed lockman! sorry about the other thread,forgot i put it in htis one.thanks all for the help!
|
06-28-2010, 02:58 PM | #13 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: lack of power on fe290 after mods
No problem chain! I answered this one first, and then saw the other thread....
Here's the thread that gave me the idea to remedy my "jury rig" http://www.buggiesgonewild.com/gas-c...ubcar-gas.html Read... Read... and read some more!!!! |
06-28-2010, 07:49 PM | #14 |
Not Yet Wild
Join Date: May 2010
Posts: 11
|
Re: lack of power on fe290 after mods
whats the fitting that attaches to the briggs elbow for?the one that looks like its for a hose?
|
06-29-2010, 06:26 AM | #15 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: lack of power on fe290 after mods
It replaces the one on the end of the carb that hooks up to the air hose going to the airbox.
the only thing that really needs to be done is, grinding down the nut side of the flange, and, drilling and tapping a hole for a "barb" (to attach the small hose coming from the valve cover.) |
06-29-2010, 12:27 PM | #16 |
Not Yet Wild
Join Date: Jul 2009
Location: east dublin georgia
Posts: 58
|
Re: lack of power on fe290 after mods
i have seen a part number for the adaptor u need,it replaces the straight adaptor with a 90 degree elbow adapter.i have looked and can not find where i found it at but i believe the elbow adaptor was a john deere part .
|
06-29-2010, 04:47 PM | #17 | |
Not Yet Wild
Join Date: May 2010
Posts: 11
|
Re: lack of power on fe290 after mods
Quote:
|
|
06-29-2010, 09:55 PM | #18 | ||
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: lack of power on fe290 after mods
Quote:
(click on the blue words below....) http://www.buggiesgonewild.com/gas-c...ubcar-gas.html Quote:
In the event your carb overflows, the fuel will bleed out that line to the ground, rather than filling your crankcase with fuel! There should be a smaller hose coming from the valve cover (it's aluminum, and has "OHV" on it!) That's what the "barb" is for! And I'm glad it's running better for you! |
||
06-30-2010, 03:10 PM | #19 |
Not Yet Wild
Join Date: May 2010
Posts: 11
|
Re: lack of power on fe290 after mods
good,i was confused because thats what i thought the yellow one was,a vent
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Resistor Coils - Lack of Power | Electric EZGO | |||
Lack of power on Beach in sand? | Electric Club Car | |||
lack of power | Electric EZGO | |||
Lack of power | Gas Yamaha |