Front axle question ezgo MPT 2004

BillieS · 05-15-2013, 07:17 AM

Been doing lots of work in the evening on the cart. I noticed that the camber/caster was way off. While I was working on an electrical problem I jacked the front end up to get to the cowl and noticed that the spindles dropped a bit. I shook the spindle to see if maybe the bearings were loose. I found that the spindles are wore.

I have not had these apart and was wondering if you have to replace the spindle or is there a bushing in the spindle that can be replaced? Where can you get either one?

I also noticed that there is not a zirk fitting the spindle housing. Most likely never had grease from the day it was rolled out.

05-15-2013, 07:17 AM	#1
BillieS Not Yet Wild Join Date: Jan 2013 Posts: 73	Front axle question ezgo MPT 2004 Been doing lots of work in the evening on the cart. I noticed that the camber/caster was way off. While I was working on an electrical problem I jacked the front end up to get to the cowl and noticed that the spindles dropped a bit. I shook the spindle to see if maybe the bearings were loose. I found that the spindles are wore. I have not had these apart and was wondering if you have to replace the spindle or is there a bushing in the spindle that can be replaced? Where can you get either one? I also noticed that there is not a zirk fitting the spindle housing. Most likely never had grease from the day it was rolled out.
BillieS Not Yet Wild Join Date: Jan 2013 Posts: 73

Similar Threads
Thread	Forum
Front axle question	Electric EZGO
Ezgo front axle 96 txt	Golf Carts and Parts
01 ezgo front axle	Golf Carts and Parts
'93 Front Axle - EZGO	Golf Carts and Parts
WTB, ezgo front axle	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum