2019 EZGO Express L6 72V turn signals

[Jbass65]

I am trying to figure out how to install turn signals on my 2019 EZGO Express L6 72V. I purchased the kit directly from EZGO and it seems to be the right kit. There are two plugs, one large white 8-pin that plugs in right behind the dashboard which causes the back turn signals to work perfectly. The issue is the 2nd plug which is smaller and the connector plug is 2 small circles. I have no idea where to plug this in. I have reached out to the manufacturer and scoured the internet and have found nothing. The part number is 615236.

Any help would be greatly appreciated.

[Newbuggyboy]

The two plugs on the small connector are for a horn.

[Jbass65]

Thanks for the info, so should my front signals be working too then with just the one plug?

[Newbuggyboy]

I would think so. But I'm a beginner, not an expert.

You can check ezgo's website for schematics for your cart.

[PooleJ]

I have just ordered a 615236 for my ezgo express s4 elite lithium as the first kit I ordered (having checked what part with Textron) was 622712. I purchased from CountryCat on line. Couple of interesting things about this kit, it does not include a steering column cover, if you want to use the horn that is on the end of the stalk then you need to purchase a wiring extender separately too. The one thing I though was nuts was that the front turn signal light does not have a bulb or holder in it just a piece of white tape covering the hole on the back of the light. I have ordered all of these items and I am still awaiting arrival of these items but I will circle back once I have attempted the install.

[wswinter]

Was the 615236 kit easy to install? I just got a 2021.5 S4 elite and need to add the turn signal. Any tips on the install?