|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-01-2012, 07:09 PM | #1 |
Getting Wild
Join Date: Jan 2012
Posts: 101
|
heavy duty f-r switch
What makes a heavy duty f r switch heavy duty is this a modification I could do my self ( copper bar stock and what not)
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-06-2012, 08:02 AM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: heavy duty f-r switch
yep. don't go too thick or you'll run out of thread on the studs...
-sj *edit - wrong picture! those are low current wires, just ignore them.. the bars were what i was trying to show. |
05-06-2012, 11:56 AM | #3 |
Getting Wild
Join Date: Jan 2012
Posts: 101
|
Re: heavy duty f-r switch
What size and thickness did you use
|
05-06-2012, 08:39 PM | #4 |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: heavy duty f-r switch
read this: Heavy Duty F&R swich for 03 Series Cart
the second page gets into my preferred method for "upgrading the switch" which is replacing it with a reversing contactor. a bit more involved, but far better solution imo. my 2¢ fwiw. -sj |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Heavy duty F/R switch | Electric EZGO | |||
heavy duty f-n-r switch | Electric Club Car | |||
Heavy Duty F/R Switch Cam Install | Electric EZGO | |||
Heavy Duty F/R switch options | Electric Club Car | |||
Heavy duty f/r switch | Electric Club Car |