|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
08-31-2012, 08:43 AM | #1 |
Not Yet Wild
Join Date: Dec 2010
Location: Virginia Beach, VA
Posts: 54
|
Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
Alex
Virginia Beach, Virginia (BRAND NEW)0.25" 304ss 1piece motor mount drop bracket. $30 shipped remove the snubber bracket from front of motor mount and install this in its place. regains full suspension movement and ride quality by eliminating preload and bind from twisted leaf springs Have had one on my wife's cart for a few years now. ride quality is excellent pic for reference |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-05-2012, 12:17 PM | #2 | |
Gone Wild
Join Date: Jun 2011
Location: S.E. Wisconsin
Posts: 184
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
Quote:
|
|
09-05-2012, 12:22 PM | #3 |
Not Yet Wild
Join Date: Jul 2012
Posts: 30
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
it would just bolt onto where the stock one is, two bolts/nuts. direct replacement.
|
09-05-2012, 12:27 PM | #4 |
Gone Wild
Join Date: Jun 2011
Location: S.E. Wisconsin
Posts: 184
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
Do you make one for the 6" lift kits?
|
09-05-2012, 12:37 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Gastonia NC
Posts: 530
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
|
09-05-2012, 12:41 PM | #6 |
Gone Wild
Join Date: Jun 2011
Location: S.E. Wisconsin
Posts: 184
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
Also, will this affect any of the cable lengths?
|
09-05-2012, 08:29 PM | #7 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
mr club car... if your snubber bolts on just remove and make a drop bracket to bolt between the 2 pcs. if yours is welded on, you can cut it off and bolt on a new one.
for an older cart you can use square tubing. the newer carts(97 and later) can get by with a flat pc of steel also carts parts plus has a nice drop mount that comes with the big block kits. He MAY sell these seperately, I do not know. I haven't found them on his site |
05-12-2018, 01:38 AM | #8 |
Not Yet Wild
Join Date: May 2018
Posts: 2
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
I would like to get one of these!!
|
05-12-2018, 08:16 AM | #9 |
Not Yet Wild
Join Date: May 2018
Location: Wisconsin
Posts: 6
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
Looks good! Thanks for posting!
|
05-12-2018, 08:41 AM | #10 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: Stainless Club car DS front motor leveling snubber mount drop for 4" lifts
A 6 year old thread, and B-Well hasn't logged in for 5 years... Thread closed!
For 96+ Club Cars, you can do what 4vertical said, a piece of flat steel will do the job, BUT... Intake tube modifications may be necessary! Here's a thread about that...>>> http://www.buggiesgonewild.com/gas-c...ubcar-gas.html Snubber 3.jpg Intake hose.jpg |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Snubber Mount | Lifted Golf Carts | |||
snubber mount bracket issue | Gas Club Car | |||
modified snubber mount | Gas Club Car | |||
Rear end leveling w/ 5" Jakes drop axle kit | Lifted Golf Carts | |||
Front motor mount | Gas EZGO |