|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-13-2011, 05:34 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 6
|
G19 Bar: Bent or Straight?
Getting ready to lift my G19, and noticed the bar from axle to the chassis, at the rear of the cart, is bent. I would not think that it should be this way, but this is the only one I have ever seen. Should it be bent, or should it be straight?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-13-2011, 06:28 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: G19 Bar: Bent or Straight?
Straight. You should be able to straighten it, we do all the time. Seems customers like to jack up the car with it or use it as a tow bar
|
12-13-2011, 08:59 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 6
|
Re: G19 Bar: Bent or Straight?
Thanks for the input. I will straighten it out.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1" straight clutch with V-belt pulley? | Big Block Talk! | |||
straight pipe exhaust | Gas Yamaha | |||
Let me get this straight, Brother in law and I disagree | Electric EZGO | |||
Looking for a straight passenger side rear axle for 95 gas medalist | Golf Carts and Parts | |||
Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha |