|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-24-2017, 07:37 PM | #1 |
Not Yet Wild
Join Date: Mar 2011
Location: Ohio
Posts: 4
|
DPI charger jumper settings
I've searched everywhere but cannot find the correct algorithm settings for Duracell batteries when using the Accusense battery charger. Thanks in advance for any help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-24-2017, 08:27 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DPI charger jumper settings
I'm not sure where the Duracell batteries fall in but every battery fits in one of these categories. Default setting is #2 which is a pretty safe setting until you can contact your dealer and ask him what vpc the batteries want to finish at. If you dealer is clueless, call DPI.
DPI Voltage Mode I-4 by Brand Names US Battery = 2.50VPC (Mode 1) - 60.0V for a 48V pack Trojan + Deka = 2.35VPC (Mode 2) - 56.4V for a 48V pack Exide + Interstate = 2.40VPG (Mode 3) - 57.6V for a 48V pack Full River = 2.45VPC (Mode 4) - 58.8V for a 48V pack |
03-24-2017, 08:34 PM | #3 |
Not Yet Wild
Join Date: Mar 2011
Location: Ohio
Posts: 4
|
Re: DPI charger jumper settings
Thanks for the fast reply Scottyb. I did fail to tell you this a 36 volt Ez Go but it appears the settings for 36 and 48 volt will be the same.
|
09-15-2017, 09:07 PM | #4 |
Not Yet Wild
Join Date: Sep 2017
Posts: 2
|
Re: DPI charger jumper settings
I have a question for the accusense 36v charger. I have a 95 club car ds with new crown 6 volt batteries. I would like to confirm that I would use Mode 2 (Trojan). Thanks in advance.
Sent from my SM-G955U1 using Tapatalk |
09-15-2017, 09:46 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DPI charger jumper settings
I answered your other thread and confirmed mode is correct for Crown
|
Tags |
duracell batteries |
|
|
Similar Threads | ||||
Thread | Forum | |||
DPI Accusense charger settings for NAPA batteries | Electric EZGO | |||
mcor jumper | Electric Club Car | |||
hey scotty settings on charger | Electric Club Car | |||
Does my Solenoid need a jumper wire? | Electric EZGO | |||
A jumper to turn the motor? | Electric Club Car |