|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-09-2017, 09:50 AM | #1 |
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Diagnostic code 2-2 on pds
I am wondering if anyone else ever had this issue it will not move, the soleniod clicks but nothing more any suggestions?? When i run the diagnostics mode I get the 2-2 beep code. Greg
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2017, 10:22 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Diagnostic code 2-2 on pds
hi Greg
The 2 series beep codes are voltage alarms. 2-1 is low voltage and 2-2 is high voltage. |
06-09-2017, 12:46 PM | #3 |
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Re: Diagnostic code 2-2 on pds
I understand but what causes this and what is the fix?
|
06-22-2017, 04:13 PM | #4 |
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Re: Diagnostic code 2-2 on pds
nobody has any idea??? I sent out the controller for rebuild and still doing the same thing.
|
06-22-2017, 04:39 PM | #5 |
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Re: Diagnostic code 2-2 on pds
Is it possible someone put in the wrong controller like a 36 volt one. Is there a difference between the 36 volt and the 48 volt one???
|
06-23-2017, 09:08 AM | #6 |
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
Re: Diagnostic code 2-2 on pds
I figured it out, Someone installed 6 8volt batteries in the machine and it is a 36 volt unit. I eliminated one battery and it works fine. I will change out the batteries and it will be all good.
|
06-23-2017, 09:38 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Diagnostic code 2-2 on pds
Every cart 'tech' should have and readily use a handheld voltmeter.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo diagnostic code | Electric EZGO | |||
Diagnostic code faults - not operating? | Electric EZGO | |||
diagnostic code 4-2 mechanical blockage | Electric EZGO | |||
2003 PDS Diagnostic fault code issue | Electric EZGO | |||
Help! MPT1000 with diagnostic code 13 | Electric EZGO |