|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-17-2017, 03:40 PM | #1 |
Gone Wild
Join Date: Jan 2017
Location: Metairie louisiana
Posts: 150
|
HD springs are bending
Heavy duty 4 leafs are starting to bend at the eye and they are almost flat Does anybody know the weight load on the original springs they said the 4 leaf were good for another 500lbs. I am thinking of going with trailer springs has any body done this. I found them 27long 1"3/4 wide in load ratings up to 500 lbs to 3000lbs.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-18-2017, 09:55 PM | #2 |
Gone Wild
Join Date: Jan 2017
Location: Metairie louisiana
Posts: 150
|
Re: HD springs are bending
I think I an going to give these a try
http://www.easternmarine.com/double-...spring-una-141 or these http://www.easternmarine.com/double-...spring-una-210 I don't know if its the weight or the torque of the motor that's bending them. should of went with lithium lol. I know me and my wife are about 500lbs my son is 100lbs and I got almost 700lbs of batteries. I also was doing some hard launches wheels off the ground maybe that was it. |
06-18-2017, 10:24 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: NC
Posts: 368
|
Re: HD springs are bending
Wish I would have seen this earlier. That's a great price for springs!
|
06-18-2017, 11:41 PM | #4 |
Getting Wild
Join Date: May 2016
Posts: 105
|
Re: HD springs are bending
I don't have near the battery weight with just 48v I don't think but I had 2 leave and I put a 27 gallon sprayer in the bed and the bent in reverse after a year. I put similar 4 leafs to what you have and I have not had issues yet. Then again I don't have the battery weight nor the torque. MY new high torque PQ ships tomorrow but still won't have enough torque to wheelie. Would love to hear if those springs are a easy swap
|
06-18-2017, 11:50 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: HD springs are bending
I bought OEM HD springs for my '98 TXT. I have 8 T-105s and routinely ride with four people under 200 pounds each, without problem.
|
06-19-2017, 07:22 AM | #6 |
Gone Wild
Join Date: Jun 2017
Location: NC
Posts: 368
|
Re: HD springs are bending
I'm probably wrong, I've looked at your picture multiple times now and I only count 3 leafs on those springs?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Bending pipe | Lifted Golf Carts | |||
Bending Top Struts | Gas Yamaha | |||
Installed rev kit, now bending pushrods | Big Block Talk! | |||
Bending u Bolts on take off! | Extreme DC! | |||
Conduit bending | Design Center |