Connecting POS Cable

[csmdew]

Thanks, will see if it I got it right.

[csmdew]

Can someone make a pic of the f/r control with beeper connected so I can figure out how to add one to both of my carts, 2002 series. Using a hd f/r switch, Thanks

[Sir Nuke]

Its right there at the top on the rear side of your F&R switch

F&R Switch Back.jpg

[csmdew]

thanks that made connecting the beeper easy, now for my new problem. Installed new alltrax sr 48300 and now getting 2 grn 3 red blinks for throttle high out of range, so how do I fix the ITS to solve the problem, thanks.

[csmdew]

Seems can't edit my own post so have to say beep error were not errors but wires not connected correctly, now cart runs just very slow; thinking I may have bad battery and will do load test on each tomorrow if I have time. But for now all is correctly connected, thanks.

[yurtle]

With a series cart, there is a microswitch on the FNR that enables 1/2 speed reverse, and turns on the backup beeper. Does your backup beeper only work in reverse?

If your backup beeper is disconnected, try removing one wire from the microswitch, and see if it goes full speed.

[csmdew]

Just connected beeper yesterday for first time and it works correctly but cart has same problems that it had with the Alltrax axe 400a controller; sometimes it would run and sometimes not, so after reading other reviews decided to replace controller and put back stock controller but cart only ran half speed so thought maybe I would buy new alltrax and got a good deal new for sr48300 and installed yesterday. Cart still runs very slow and then started doing the same thing as with first controller, go no go. Step on pedal numerous times and nothing and the it takes off but quits and starts so end up pushing to house. I'm pretty sure that it's the ITS but all advice received on here doesn't suggest that. With the 400 controller it would run fast and faster or not at all, but never slow. Think I am getting too old to screw with these things. Gonna replace the ITS and see if that's the problem when I can't more energy.

[csmdew]

Originally Posted by yurtle

With a series cart, there is a microswitch on the FNR that enables 1/2 speed reverse, and turns on the backup beeper. Does your backup beeper only work in reverse?

If your backup beeper is disconnected, try removing one wire from the microswitch, and see if it goes full speed.

Disconnected the orange 1/2 speed wire and card ran twice as fast but still slower than it should; so does that mean this expensive hd f/r switch is no good or what. All the wires have been in the same place for 3 yrs with exception of one black to beeper. thanks

[csmdew]

Don't ever get old, these eyes ain't what they used to be; the reason I had problem with 1/2 speed is because I had it plugged to wrong side of micro switch. Even looked 3 or 4 times at my other cart which is right and still connected it wrong. Right now I'm happy, cart running and getting about 19mph out of it, thanks all for the help.