|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-23-2017, 12:55 PM | #1 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
2009 ezgo PDS ITS problems
I have a 2009 ezgo TXT PDS. It will not go in forward or reverse. Reverse beep sounds when the f/r switch is in reverse. Solenoid clicks when gas pedal is pushed in forward and reverse. Micro switch tested good. I placed volt meter on -B and the white wire of the ITS, pressed the gas pedal, my volt meter read 27 volts. If I understood correctly, I should be getting between.3 and 1.7 volts. Am i safe to assume that the ITS is bad?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2017, 01:05 PM | #2 | |
Gone Wild
Join Date: Jun 2017
Location: NC
Posts: 368
|
Re: 2009 ezgo PDS ITS problems
Quote:
|
|
08-23-2017, 02:20 PM | #3 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
When it comes to testing the controller, I am not sure where to start. Is there a STICKY that has the info on how to test the controller?
|
08-25-2017, 02:35 PM | #4 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
I checked the voltage on the controller. I get 56.5 volts on the battery pack and I get the same on the battery side of the solenoid. I get 53.5 on the controller/motor side of the solenoid.
The cart will not go in forward or reverse. What should I check next? |
08-25-2017, 02:37 PM | #5 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
|
08-25-2017, 02:39 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 2009 ezgo PDS ITS problems
We need some more detail. 56 volts?
|
08-25-2017, 03:31 PM | #7 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
I was shocked to see that many volts. I went back and checked it again, but i still got 50.5 volts and then 48.5.
I'm a beginner at this. I'm pretty savvy, but I'm not sure what more info you will need. Can you give me some items to look for or parts to test and I'll get the info. Or can you direct me to a sticky that might help me to gather more info. Thanks!!! |
08-25-2017, 03:33 PM | #8 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
I also switched out the ITS with one from another cart I have, that I know works, and the cart still would not move.
|
08-25-2017, 04:23 PM | #9 |
Gone Wild
Join Date: Jun 2017
Location: NC
Posts: 368
|
Re: 2009 ezgo PDS ITS problems
Can you post the model number of your controller?
|
08-25-2017, 05:16 PM | #10 |
Not Yet Wild
Join Date: Aug 2017
Posts: 9
|
Re: 2009 ezgo PDS ITS problems
I have a Curtis model # 1206MX-1120
Part # 609083 |
|
|
Similar Threads | ||||
Thread | Forum | |||
2009 ezgo rxv will not go | Electric EZGO | |||
2009 gas ezgo - intermittent running problems | Gas EZGO | |||
My 2009 ezgo RXV will be done in a week!! | Electric EZGO | |||
2009 ezgo rxv | Electric EZGO | |||
2009 ezgo | Gas EZGO |