|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-16-2017, 02:07 PM | #11 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Thanks Scotty but you lost me on a lot of that. I'm not the greatest when it comes to the electrical side of this thing. If you don't mind could you give me a little more detail please. Not sure how to check for continuity everywhere, is there a wiring diagram for that?
The solenoid is clicking though. Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-16-2017, 02:15 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax xct 400 pds blink codes
Here is a short video on my website which will show you how to use your multimeter to test continuity ( at the places I suggested. Don't have a meter? The video will tell you what to get and where.
Go here > http://www.cartsunlimited.net/troubleshooting-tips.html |
09-16-2017, 02:37 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax xct 400 pds blink codes
Here is a short video on my website which will show you how to use your multimeter to test continuity ( at the places I suggested. Don't have a meter? The video will tell you what to get and where.
Go here > http://www.cartsunlimited.net/troubleshooting-tips.html |
09-16-2017, 03:41 PM | #14 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Great, thank you !
Sent from my iPhone using Tapatalk |
09-17-2017, 12:55 PM | #15 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
I think the problem is in my motor. I hooked up wires to test it like in the diagram. All I am getting is a spark, no movement.Ugh.... is there any hope?
Sent from my iPhone using Tapatalk |
09-17-2017, 01:48 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax xct 400 pds blink codes
You Might have a motor problem, innocent kid just parked it? Not if the motor is bad..... Did you do the continuity tests I suggested on the motor? Go back and read it.
|
09-17-2017, 02:21 PM | #17 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
I do remember when I tried to move it into the garage I smelled a slight burnt smell, thought it was the solenoid but obviously it wasn't. When I'm doing the continuity testing should I have the key on? I'm good on the mechanical side just not so much with electrical
Sent from my iPhone using Tapatalk |
09-17-2017, 03:53 PM | #18 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Battery pack is reading 38.1 V .
When I tested the small white wire on the 4 plug it read 7.6 V and with full pedal it red 5.6 V. I had 6.8 V when I probed the small white and black wire in the 4 pin. The FR switch has correct voltage as well as the key switch. I changed out the ITS from a cart I have at work and it is working but is still reading 7.6V As you know I have the new controller and new solenoid with all new 2 gauge cables. Solenoid is clicking every time. I can't find how to check continuity to the motor. Should it have moved when I tried jumping the motor instead of just sparking? This is driving me a bit crazy and I will probably be bald by the end of the week. Sent from my iPhone using Tapatalk |
09-17-2017, 06:14 PM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax xct 400 pds blink codes
If you watched the video I linked you to you know how to test for continuity with your multi-meter...
Mark and remove all 4 motor wires. With the meter set to Continuity you should not have any continuity between any A and any F terminal. If you do it's history. Ask the kid how far they pushed had to it - LOL If you smell burnt electrical AND have any continuity between any A and any F we are beating a dead horse. The new controller is reverse polarity protected. Pull the motor and sniff it. |
09-17-2017, 07:08 PM | #20 |
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Ok thanks! I had no idea I needed to pull the wires off the motor to check. Like I said electrical ain't my thing but I'm learning. Funny thing is I saw the kids pull the cart up in to the driveway that day, everything seemed fine.
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SPM 48300 EZ 4 blink green | Electric EZGO | |||
Alltrax DCX300 blink code low voltage & motor overheating | Electric Club Car | |||
600 amp alltrax error codes | Electric EZGO | |||
Alltrax SPM no error codes but not working | Extreme DC! | |||
Blink codes for 48V DS | Electric Club Car |