EZ-GO Shuttle 6 Lift Question

[ClubCarAl]

Originally Posted by WickedCarts

these pics of a build we did and yes we made a custom rear lift and we have wheel adoptors from 5 to 4 lug


and thank you

Old post, but I'm looking for 5 lug to 4 lug adapters, where did you find them?

[BenIrwinAz]

I am currently working through the same thing. I have a 1999 EZGO Shuttle and need to figure out how to lift it. Put the front on, no issue, now trying to figure out how to do the rear. Any suggestions? They have to have a kit somewhere for this!

[ClubCarAl]

Ben. I feel some of your pain. Im working on a 2001 shuttle and I too ran in to issues with the rear lift. I ended up getting my grinder out and modifying the rear blocks so they would work around my hydraulic brakes. I saw a post from a few years back from Wicked Golf Carts that gave me the idea. I don't have pictures of the blocks prior to install, but I'll attach a few pictures to show you.

[BenIrwinAz]

Thanks for the reply! I ended up having the brackets custom welded. Turned out really well! 6 inch standard lift in the front, and with the rear mod, its at about 7 inches for the lift.

[ClubCarAl]

Looks good!

[Garciadanny05]

Originally Posted by WickedCarts

these pics of a build we did and yes we made a custom rear lift and we have wheel adoptors from 5 to 4 lug


and thank you

Wicked, where are these photos located? I cannot seem to find them.

[Garciadanny05]

Originally Posted by ClubCarAl

Ben. I feel some of your pain. Im working on a 2001 shuttle and I too ran in to issues with the rear lift. I ended up getting my grinder out and modifying the rear blocks so they would work around my hydraulic brakes. I saw a post from a few years back from Wicked Golf Carts that gave me the idea. I don't have pictures of the blocks prior to install, but I'll attach a few pictures to show you.

Very nice clubcaral!! I am trying to figure this exact issue out now. Wish there were some photos of your brackets from before install. Im scared to start cutting away and ruin my blocks.

[Garciadanny05]

Originally Posted by WickedCarts

these pics of a build we did and yes we made a custom rear lift and we have wheel adoptors from 5 to 4 lug


and thank you

Wicked, where are these photos located? I cannot seem to find them.

[yurtle]

Originally Posted by ClubCarAl

Old post, but I'm looking for 5 lug to 4 lug adapters, where did you find them?

Still old, but if you haven't found adapters, a local machine shop can easily fab some. Support your local workers.

[BravoNovember]

Hi all. Had several carts over the years but new to this forum. I have a 2000 Shuttle 6 amd need to give it some TLC. It’s all stock, not looking to do much but the suspension is shot and I’m going through tires like wildfire. Steering is super sloppy and these 5 lug rims are driving me insane. Tired of going to the local automotive shop to get tires mounted. I’m looking to replace the steering box, shocks, bushings, etc. Potentially a small lift to fit 12 or 14” tires. Definitely curious as to others experience with the lifts since y’all said the rear gave you problems. I’m handy but not looking to do any welding. In that case I’d just pay a shop for the install. DEFINITELY want to swap out for the 4 lug pattern, so please point me in the right direction on that. Thanks all!