|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-01-2014, 04:37 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Ohio
Posts: 4
|
2008 TXT with Jakes 6" spindle lift tire question
I'm currently running 23x10.50x12's on my 2008 TXT with a Jakes 6" spindle lift and coil over shocks on the front. Does anyone know if 26x10x12's will work without rubbing? Thanks in advance.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-01-2014, 07:39 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: 2008 TXT with Jakes 6" spindle lift tire question
Measure your 26's. If they measure 25" and you don't offroad then they MAY clear without rubbing. If you offroad at all then the 26's will rub. I'd recommend 8" lift for 26" tires.
I hope you are already at 48v or more with 500 amp controller or larger and custom motor if you want to run 26's decently. Attached are a couple carts I built with 26's. Both were 8" or more. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Madjax 6"Spindle Lift Vs. Jakes 6" Spindle Lift | Electric EZGO | |||
| 2008 EZGO RXV Jakes 6" Spindle lift installation Photos | Electric EZGO | |||
| Jakes 6" Spindle Lift Question | Lifted Golf Carts | |||
| Jakes 6" Spindle Lift Kit Question | Lifted Golf Carts | |||
| 6" Jakes spindle lift for 84-96 Club Car | Golf Carts and Parts | |||
Linear Mode
