|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-19-2014, 05:14 PM | #1 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
How to remove Input Gear???
I have an electric marathon from 81 and I have the rear end open but cannot figure out how to remove the input shaft. I have the gears out, axles out, and motor off. It wont budge and I don't see any c clips holding it in. It is the "worm" type input gear just like on a gas marathon of the same time period. Any ideas?!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-19-2014, 05:34 PM | #2 |
Guest
Posts: n/a
|
Re: How to remove Input Gear???
does the motor hook up from the front or the side ?
|
12-19-2014, 06:10 PM | #3 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: How to remove Input Gear???
|
12-19-2014, 06:28 PM | #4 |
Guest
Posts: n/a
|
Re: How to remove Input Gear???
this might help
it shows a lock nut at #19 83 ~86 ezgo |
12-19-2014, 09:01 PM | #5 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: How to remove Input Gear???
|
12-19-2014, 09:04 PM | #6 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,187
|
Re: How to remove Input Gear???
Getting that nut off with the gears out will be a trick.
|
12-19-2014, 09:12 PM | #7 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: How to remove Input Gear???
|
12-19-2014, 09:37 PM | #8 |
Guest
Posts: n/a
|
Re: How to remove Input Gear???
any way to clamp a piece of rubber to the worm gear ?
maybe an inner tube and vice grips ? |
12-19-2014, 09:49 PM | #9 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: How to remove Input Gear???
I as thinking that too...other issue is how to get socket down on the nut. It sits too low in the housing to get at it with a wrench and the input shaft from the motor is too long for any deep socket. Might be an excuse to go buy one of the "through" socket sets.
|
12-19-2014, 10:20 PM | #10 |
Guest
Posts: n/a
|
Re: How to remove Input Gear???
yeppers !! got one a few years ago and use it often
http://www.harborfreight.com/21-pc-s...set-67974.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Rear differential input shaft nut crimped? how to remove input shaft?! | Gas EZGO | |||
8:1 Gear Change - Ring Gear Torque Value? | Electric EZGO | |||
ezgo marathon back gear box? question i describe in depth not sure if its gear box | Gas EZGO | |||
WTB: 91 marathon input gear | Electric EZGO |