help: need a 99 Ezgo TXT F/R switch wiring diagram

[CustomGolfCartGuy]

i have a 99 ezgo txt in the shop right now that isnt running and i just found out after replacing almost everything on it that the customer installed the F/R switch themselves. (its new so i didnt check it) anyways i was going to take it off to check it and see if its the problem but before i did i relized he could (and most likely does) have the cables in the wrong spot. i dont want to remove it until i can find a wiring diagram and see if it is hooked up correctly. i searched and couldnt find the right switch diagram. anybody have one?

[scottyb]

here you go - from the Ezgo manuals

[CustomGolfCartGuy]

Originally Posted by scottyb

here you go - from the Ezgo manuals

UPDATE:

good news too it apart and relized he hooked the cables up backwards and melted the switch. have a new one coming. thanks a lot

[scottyb]

Bad news is you got another ho-hum heavy duty (cough - cough) switch coming.

[mutant]

yep

[CustomGolfCartGuy]

Originally Posted by scottyb

Bad news is you got another ho-hum heavy duty (cough - cough) switch coming.

scottyb my price from nivel was 85 bucks for a new one, i think yours is a great price at about double that. this customer is a cheap *** and i doesnt want to spend a penny more then needed. also the way he wired the first one it wouldnt of mattered if it was the strongest f/r switch in the world it would of fried. he had the cables wrong and also didnt tighten the nuts to the cables so they were all loose and would shake around the couple times the cart did move.

do you do special pricing for dealers? im am very interested in some of your products and also will be putting a new built motor in a stretch cart we are building and might need some controller upgrade help.

[CustomGolfCartGuy]

Originally Posted by caseyscustoms

scottyb my price from nivel was 85 bucks for a new one, i think yours is a great price at about double that. this customer is a cheap *** and i doesnt want to spend a penny more then needed. also the way he wired the first one it wouldnt of mattered if it was the strongest f/r switch in the world it would of fried. he had the cables wrong and also didnt tighten the nuts to the cables so they were all loose and would shake around the couple times the cart did move.

do you do special pricing for dealers? im am very interested in some of your products and also will be putting a new built motor in a stretch cart we are building and might need some controller upgrade help.

i apoligize i relized this could of easily been a private message. my bad

[scottyb]

I do all I can do for you dealers and cart shops right here.

The Nivel HD F&R is no better than original equipment, that's all i was saying

[CustomGolfCartGuy]

Originally Posted by scottyb

I do all I can do for you dealers and cart shops right here.

The Nivel HD F&R is no better than original equipment, that's all i was saying

oh i gotcha. yea the way he had it wired it would fry anything. thanks